Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: next mod?

+ Reply To Thread
Posts: 21-30 of 30
2011-07-20 08:12:00
Atleast N1's, spec'd header and tuneable ecu.
2011-07-20 08:16:26
If you are dead set on digging into the motor, with 1k you can do an 88mm build possibly. Using stock sleeves.
2011-07-20 12:08:35
Originally Posted by ashtonsser
Y I would not use a cometic headgasket unless you want problems. Get a mazworx gasket.

HI just want to know whats bad about the cometic? good info
2011-07-20 12:31:30
all boltons, N1s and all. i really want to be around 250whp. i know $1000 wont put me there but its will be a step in the correct direction. i think my weak point now is my ebay header, but its getting the job done. looks like ill save a bit more and go from there

and as far as management so far im a calum computer, but plans are to ditch that and step down to OBDI and find out if gio can tune it...
2011-07-20 12:35:01
Ebay header for some reason will not go past 205. Mike had an ebay header and the car was topping out at 203-204. He slapped on a fuji, car netted 208whp first pass, he ended up with 212whp. Cam and header will make or break your power.
2011-07-20 13:21:41
Realtime Calum? Have you dynod/tuned? Be more specific!!
2011-07-20 14:21:24
250 hp with a 100 shot would be nice.......
2011-07-20 23:52:37
Calum basic, not fine tuned. I want to step down to OBDI because more people (gio, that I know of) will tune OBDI and nobody does OBDII. I'm thinking a better header and maybe some 6UL wheels.
2011-07-21 00:46:14
Originally Posted by qwkse-r
250 hp with a 100 shot would be nice.......

265 os possible with a 75 safe best bolt on ever lol
2011-07-21 01:41:12
Originally Posted by alex_b13
265 os possible with a 75 safe best bolt on ever lol

that explains alot

lol j/k
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top