Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: oil smelling like gas..?? please help

+ Reply To Thread
Posts: 21-30 of 36
2011-03-28 03:12:22
#21
Originally Posted by SERIO_PEDO
U need to get your ecu reflashed for the 370's look on the forums you'll find some good used ones for cheap but 333's are harder to find out there unlike the 370's


i wonder y...? lol dident the 370's come in rwd det's?
2011-03-28 09:49:09
#22
I would try the simple low cost things first, but a leaky injector doesnt sound too far off. Especially if it leaks alot when the engine is off.
2011-03-28 12:00:12
#23
i have a ve rail with injectors and a nismo fuel press reg on it for $150 located in queens just throwing this out there..
2011-03-28 14:04:50
#24
Just to add in.. I bought my ve from jdm engine depot and before they give u the motor they remove the spark plugs and put ATF (automatic tranny fluid) in the cylinders.. And on a another note they degrease and powerwash every engine before its sold.. Idk why they do this...
2011-03-28 17:00:08
#25
Ive bought 2 SR's from JDM engine depot (S13 DET and a VE) Neither of them had ATF in the cylinders or were powerwashed. Both run and drive awesome. The dude who runs the place seems to have on and off days though, the second time I went there to get the VE he was really cool, not so much the first time. But for sure no complaints about them as a company.
2011-03-28 17:50:33
#26
Originally Posted by fastkx125
Ive bought 2 SR's from JDM engine depot (S13 DET and a VE) Neither of them had ATF in the cylinders or were powerwashed. Both run and drive awesome. The dude who runs the place seems to have on and off days though, the second time I went there to get the VE he was really cool, not so much the first time. But for sure no complaints about them as a company.


This place is great, when i went the guy was mad nice as well this is the 3rd time for me. He let me search the whole place and i found this ve hiding in a corner by some toyota motors. She runs strong and im happy with it its juss these lil things that sooner or later can ad up to a few paychecks
2011-03-29 22:15:25
#27
Dont get it twisted im not talking bad on the place.. But if you dont believe me that they put ATF in the cylinders than thats on you.. I watched him do it and asked what he was putting in there.. It was not alot it was like a tablespoon and the. He cranked the motor over to make sure it wasnt siezed.. And next time you go there on the left isle on the left side at the end it where they powerwash the motors and degrease them.. I picked my motor, they washed it and prep'd it and finally cranked it..
2011-03-30 01:09:06
#28
Originally Posted by OhSoGreen
Dont get it twisted im not talking bad on the place.. But if you dont believe me that they put ATF in the cylinders than thats on you.. I watched him do it and asked what he was putting in there.. It was not alot it was like a tablespoon and the. He cranked the motor over to make sure it wasnt siezed.. And next time you go there on the left isle on the left side at the end it where they powerwash the motors and degrease them.. I picked my motor, they washed it and prep'd it and finally cranked it..


nah i kno ur not talking bad about the spot the place is excelent i kno for a fact they put atf in there they told me when my boy picked up a b18 from them as a matter of fact the lil cornner where i found my VE was next to that bath where all the power washing takes place but this time i went all the VE where still dirty i guess i got lucky with mine
2011-03-30 01:20:56
#29
ohh btw i think i figuerd out y my oil is smelling like gas i looked at the fuel rail no leaky injector an the pcv is basicly new im pertty sure this bitch is running stupid rich my only guess is the MAF sensor that came with the car im not too sure where it came from a freind of mine says its a GM maf and that he had the same issue with his GSX he said that there horible and they never work they way they should i could be wrong tho ima post up some pics of the maf and hopfully some one could correct me if im wrong... the ecu says its set up for ve maf this is y im worried if changing the maf to the correct one will fix this im ready to buy one asap
2011-03-30 01:44:00
#30
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top