Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Using P11 Cams with a turbo

+ Reply To Thread
Posts: 1-4 of 4
2010-08-01 08:50:53
#1
Using P11 Cams with a turbo
Hi,

I have a SR20ve+T in a RWD 180sx

Running a GT35r turbo with all the trimmings....

Im still using the stock P11 cams and just wanted to know what other people have them set at to run in a turbo setup?

I have adjustable cam gears so i just need something close for when it goes back for it finial power tune.

Also any other cam options for turbo?

I have 20v cams coming but just wanted to see what else was out there?

Link to my build: Finally starting the next phase of my project... - Hardtuned.net

YouTube - SR20VET RWD

Taark
2010-08-01 15:37:07
#2
Nice build!. Depends on if your pistons did u get the cut for the VE head? or are they just stock DET pistons. You might running to valve clearance problems if you run a bigger cam. Some people get away with the SR16VE non N1 cams on the FWD DET pistons and some say it didn't work.
2010-08-01 15:43:14
#3
http://www.sr20-forum.com/turbo/18057-nissan-primera-dyno-now-sr16-cams.html search that guys name he has some good info on his VE+T setup.
2010-08-01 20:40:14
#4
hmmm, I am using arias forged pistons. These are not cut with valve relief's in them.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top