Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: No Fuel and no tach after changing Calum chips

+ Reply To Thread
Posts: 11-14 of 14
2010-06-25 21:37:16
#11
Have you tried just burning the chips again?
2010-06-25 22:00:22
#12
Originally Posted by BlueRB240
Yes plug it in and unplug the maf.


I am using DE maf still so why would I unplug it?

Yes I burnt 3 sets of different bins on different chips and still same symptoms, no fuel pump relay, no rpm , no cooling fans at high temp.

Will have to get a DE ecu.

Thanks.
2010-06-25 22:15:48
#13
Originally Posted by Wojtekj
I am using DE maf still so why would I unplug it?

Thanks.


Because in your 1st post you said you put a N60 maf on. If you haven't changed the maf then leave it plugged in.
2010-06-25 22:55:08
#14
Originally Posted by BlueRB240
Because in your 1st post you said you put a N60 maf on. If you haven't changed the maf then leave it plugged in.


Thanks, I will try that.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top