Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: help needed, GA16DE out SR16VE in, turning over but no spark

+ Reply To Thread
Posts: 1-1 of 1
2010-05-09 21:46:28
#1
help needed, GA16DE out SR16VE in, turning over but no spark
basic story, im working on an engine conversion on a 1.6 primera. the engine going in is a pulsar VZR engine.

engine and loom in car. standard internal loom the same but we used the vzr engine loom, which was basically in 2 parts. bits on the engine which stayed there and then the main bit that plugs into the ecu, that bit plugs into the connectors that were on the engine etc. so basically just one loom.

now the engine is turning over but will not ignite. theres no spark. theres no power even going into the dizzy. we got it plugged into a diagnostics machine but it would not recognise the car. the fuel pump also was not working so what we done is we ran a cable from the cigarette lighter back to it. now that runs. contstantly, but it runs.

speaking to a honda head, he says that we need some form of a relay or something? honestly dont know what he was on about but he just told us to swap out EVERY SINGLE wire from the vzr and put it into the primera. thats gonna take too much time, and time we dont have unfortunately!

to eliminate the immobiliser we plugged in the GA ecu but still the same problem!

please! anything at this stage will be greatly appreciated
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top