b13 vvl won't start ..problem found.it now runs:)
So we are using the stock de maf. inj. dist. and ecu. The motor would not fire up. I pulled the spark plugs and all four plugs had oil on them. I did a compression test 1cyl was at 210 2.3.4 where 90-110 the test was done at cold engine temps since we can't get the dam thing started..
Tomorrow im going back with a spare dist. cap. rotor and a spare ecu. and swap them out. So far i swapped the coil . igniter and tested the voltage at the coil plug and it was 12v. i turned the dist. by hand to hear if the inj. are firing and they are.All fuses are good
Can this motor be shot? any other ideas ?
Tomorrow im going back with a spare dist. cap. rotor and a spare ecu. and swap them out. So far i swapped the coil . igniter and tested the voltage at the coil plug and it was 12v. i turned the dist. by hand to hear if the inj. are firing and they are.All fuses are good
Can this motor be shot? any other ideas ?