Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: RPM Signal wire

+ Reply To Thread
Posts: 1-10 of 16
2010-04-12 01:05:02
#1
RPM Signal wire
Is the RPM signal wire for a 91 b13 the blue w orange stripe? I hook my switch to it not working..
2010-04-12 02:38:16
#2
no... blue with black stripe... Have fun!
2010-04-12 02:47:05
#3
at the ecu or by the coil?
2010-04-12 04:18:42
#4
its the number 3 on your ecu, i just did this and the wire was yellow/orange so just go by the pin
2010-04-12 05:56:36
#5
Mine was blue w/ black stripe @ the ecu.. Same with my friends 92 b13
2010-04-12 16:54:23
#6
Originally Posted by PEDRONX2k
at the ecu or by the coil?


at the ecu i just was guided by the APEX install instructions on this forum and was correct it is suppose to be blue with black stripe same as the FSM on Mitchell... Good Luck!
2010-04-12 21:18:39
#7
Cool thanks i will try that one,lol
2010-04-24 00:35:27
#8
What is it on the B14?
2010-04-24 00:48:43
#9
any one have a pic of which wire at the dizzy? i wanan run my switches in the hood
2010-04-24 01:20:19
#10
Originally Posted by rmyc
any one have a pic of which wire at the dizzy? i wanan run my switches in the hood


Which chassis? The B13 has a coil seperate from the distributor, which is the white wire I believe, where as the the b14 has an internal coil from the distributor...I'm still trying to figure out how to wire up my craine ignition on my b14....
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top