Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: justa bolt on ?

+ Reply To Thread
Posts: 1-10 of 10
2010-03-22 11:08:41
#1
justa bolt on ?
what all do i need yet...i have a sr20ve with n1 cams...underdrve pulley....flywheele...intake....header. I know i need thermo spacerswhich i will be ordering ASAP...i just wanna make sure i have everything before i swap itin...thanks bros
2010-03-22 15:44:39
#2
ok you have all aftermarket products. are you asking what basic tools you need to swap a sr20ve motor, into what by the way? you still need a turbo, a vtec controller and a search button.
2010-03-22 16:11:51
#3
The search engine here linda sucks compare to the old forum but good luck with the swap just need to be a lil bit more specific to what exactly it is that ur planing on doing
2010-03-22 16:31:05
#4
Originally Posted by MiguelsaysHELP!
The search engine here linda sucks compare to the old forum but good luck with the swap just need to be a lil bit more specific to what exactly it is that ur planing on doing


O'rly?

Prove it.
2010-03-22 16:35:59
#5
I search for p11 bumper and dont get the thread with a p11 bumper sorry feel like i taking over thread but seriously cliff i try searching and i willgo nuts triyng to look for things
2010-03-23 00:18:05
#6
i mean what other bolt ons are out there ....or any opinions or advice on what to do before i swap
2010-03-23 00:38:21
#7
Originally Posted by DEeTer
i mean what other bolt ons are out there ....or any opinions or advice on what to do before i swap


ITBS
2010-03-23 20:16:19
#8
Itbs on vvl be sick!
2010-03-23 20:55:28
#9
Originally Posted by MiguelsaysHELP!
The search engine here linda sucks compare to the old forum but good luck with the swap just need to be a lil bit more specific to what exactly it is that ur planing on doing

If you are familiar with the "old forum" then you are familiar with their Technical Library, correct?

Originally Posted by DEeTer
i mean what other bolt ons are out there ....or any opinions or advice on what to do before i swap

Perhaps you are not familiar with all of the resources available to this SR20 Community. There is indeed a helluva fine Technical Library on the SR20Forum.

And this is the section you need:

NeoVVL Guides - SR20 Forum

Read it all. Twice. Before you start your current build. Everything you need to know, all the parts you need or could add to your build, and what you need if you only want the bare minimum "required" parts to complete the swap correctly.

I use the "SR20 Community Information" from both forums anytime that I have a question in my mind.
2010-03-23 21:46:22
#10
Who's linda?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top