Thread: How can I recognize N1 cams?

Hi, like the title say, How can I recognize n1 cams? Theres any number on the cams?

Thanks a lot

orange type color con the cams if a remember correctly

You can't go by the color marks on a cam, they vary greatly. The only way to tell is to measure them

Ok, thanks you both.

The right measure of the lift is:

A-B = lift (11,9 mm high exhaust lift and 12 mm high intake lift)



Right? or no? or must I consider other things to obtain the 11,9mm and 12 mm?

Thanks

.....mmmmm, searching on the net, and I must consider the "rocker ratio", right?

(A-B)*rocker ratio =11,9mm (or 12mm)

Right?

I believe the measurement is easier.

Looking this thread --> http://www.sr20-forum.com/vvl/18268-sr20ve-sr16ve-spec-pics.html

I only need measure "A" (on the picture above) and compare with the "cam nose heigth" (on the thread), right?

Thanks in advance

http://www.sr20-forum.com/southwest/5885-looking-roller-rocker-sr20-bottom-end-block-my-ve.html#post80521

That will be the quickest/easiest way for you to know for sure

Yo tengo un set nuevo que no he instalado aun. Comunícate conmigo para que lo veas en persona. Dile a Cristobal que te ponga en contacto conmigo.

Saludos

Gracias claudio por tu ofrecimiento. Estaremos en contacto. ¿tiene unas lineas verde y roja por si acaso? Por que de ese color tienen las que estoy viendo. En todo caso creo que lo mejor es medir la altura de los camones y compararla con la de las especificaciones

Saludos

Red and Green