Thread: Slicks ( brand and size )

24.5x8x13 on any B13/B14/B15/P10/P11 over 300whp.

max has been 105.99



I got regular sr20 tranny

I'm interested on the all-motor +-195hp

trust me. go w 23 and stay in 3rd. search around

I would try to stay in 3rd gear across the traps, unless you use a shorter FD/gear box that you end up shifting into 4th soon enough to make up the difference.

23 x 7.5 x 15 or 23 x 8.5 x 15 M&H slicks

I am using a SR20DE B13 gear box

With my 205 x 40 x 17 = 23.5 Dia Drag Radial tires I run 13.4 @ 104-105 MPH with a 2.0-2.1 60 Ft Time. I go through the traps right around 8000 RPMs.

If you had a 23 in tire you would do about 107 @ 8400 - 8500 RPMs. This is right at the top end - back side of the power band of a SR20VE with N1 cams

I already know if I had a 23 inch slick my car would get a 1.8 60 Ft time and run 12.9-13.0 @ 106 - 107 MPH. The numbers are there.

I raced an Integra with a K24 and slicks and that car ran 13.0 and 12.9 @ 104-105 MPH at the track. My car was faster than that car on the road. They even said they ran 13.4- 13.5 on drag radials.

Sorry, wasn't necessarily directed to your original post. Was just a general post thrown out there. Anything under 300whp I would recommend a 23" slick. 22" or 22.5" slicks aren't really worth it.

So what's the difference when using a 13 rim vs a 15 rim for slicks??? I went to buy some slicks today and the didn't have any 13's at the moment, but they did have the 15's in stock. Would they work with my 15 x 6.5 rims?

Macho creeme no te dejes llevar mucho por lo que digan aqui pa all motor 22x8x13 pero tienes que buscar al distribuidor de M&H aqui en la isla no te desesperes y vallas a comprarlas en 15 no bregan igual.... en 13 son mejores quizas te haga los cambios un poco mas cortos pero eso te debe beneficiar ademas al ser 13 tienen mas pared de goma para estrujar...

This is what I think.If you was to have a sr16 tranny I will go with 24.5x8.5x15.The 24.5 will be suitable for the shorter gears on the sr16 tranny and being 24.5 on a 15 will be a good amount of sidewall.These are the slicks I have, just waiting on getting a good and reasonable price on the tranny to get one and go to the track.

Now if I was to run a sr20 tranny I will go with 22x8.5x13.In my opinion 22 will be suitable for the long sr20ve gears and on a 13 inch rim they will have a good amount of sidewall.