Thread: sr20ve ecu circuitry help

Heres my situation. From my research terminal 104 on my sr20ve ecu provides a ground for the fuel pump relay.
I mistakenly placed a short across the terminals for the relay coil in the receptacle for the relay in an attempt to start the fuel pump.
After this the ecu was not communicating at the diagnosis port nor was the engine starting.

Q. Can anyone tell me what electronic component on the A19-001 BJ7 circuit board is resonsible for switching the fuel pump relay?

Thanks

If you are asking what is the pin for the fuel pump, it's the 104
Have a look also on this

If you have fried your ecu and want to replace the stuff involved then I don't think you'll get much help neither you can easily solder around these ecus.
The guys on this forum rarely use VE ecus and most of them end up for sale.

Well the way i see it the ecu is already fried so there cant be much harm in me poking around right?