Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Post your VE engine bays

+ Reply To Thread
Posts: 481-490 of 695
2012-08-01 01:23:29
#481
Originally Posted by blusteelsr20
^^^Where did you score your PC680 mounting case at? Nice!!


found this
http://www.jhpusa.com/store/pc/viewPrd.asp?idproduct=6395
Last edited by klassickrican on 2012-08-01 at 01-26-15.
2012-08-01 01:24:24
#482
Definitely digging that mount. Clean good job
2012-08-01 01:26:07
#483
Originally Posted by blackb13se-r
That's the full stillen kit.


I thought so.. But i've seen diff kits called the "stillen kit" thanks. gots my car stripped to nothin ready for paint, just want some lips and skirts...
2012-08-01 02:30:45
#484
Originally Posted by det-ser92
Originally Posted by blackb13se-r
That's the full stillen kit.


I thought so.. But i've seen diff kits called the "stillen kit" thanks. gots my car stripped to nothin ready for paint, just want some lips and skirts...


Yup stillen kit
2012-08-01 02:33:56
#485
Originally Posted by nukedog
Originally Posted by blackb13se-r
That's the full stillen kit.

what is the grill? How hard is stillen stuff to get a hold of nowadays?


Thats the jdm sss grill. As far as stillen stuff i dont know i bought the kit 10yrs ago..
2012-08-01 03:08:23
#486
Everything is still available afaik.
2012-08-01 12:28:49
#487
yeah.. stillen website, $388 somethin.. might be sellin a xbox 360 and a ps3 to get it, so I can post my clean VE bay on here
2012-08-03 03:12:31
#488
Took this pic earlier tonight, sorry it's a crappy camera phone:

2012-08-06 02:36:10
#489
I envy those engine bays...

I just want to know, where will i place my ignition coil if im going to use the external ones?
2012-08-06 20:09:36
#490
Originally Posted by datsun_sky
I envy those engine bays...

I just want to know, where will i place my ignition coil if im going to use the external ones?


Are you going to use the stock coil? FWD? If so, you can unbolt the coil from the stock mounting braket then bolt it to the block using one of the bolts that bolts on the solenoids to the block. I used one of the bottom ones on my buddy's B13. You can see that's what a few people did on here.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top