Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Post your VE engine bays

+ Reply To Thread
Posts: 221-230 of 695
2011-08-14 10:24:49
#221
Originally Posted by G20-Budo
I just noticed I haven't posted up my engine bay in this thread yet..so here goes.





okay I know may be stupid question but again how much does one of these valve covers go for and do they just bolt up to the sr20ve motor?
2011-08-14 10:42:40
#222
You can get one from Greg V or used from partouts for about $260 or less. And yes they bolt up to the VE head no problem.
2011-08-14 14:22:33
#223
Originally Posted by Loek
Donde estas en Costa Rica ?


mae en curri.
2011-08-14 17:34:11
#224
There are two things you need to look out for when getting a 20V vc.

First: You need to get the RWD DET spark plug well gasket (that's the gasket for the center of the VC, that's the one they decided to use on the 20V vc).
Second: The spark plug wires fit a bit weird (because it was designed for coil over plug). You will probably have to trim some of the rubber up at the top sealing area so that the plug wires fit well. (sorry if this is slightly off topic).

I'm very happy I got mine, I love the way it looks.
2011-08-15 01:37:33
#225
^^^^ Tell it VE bro!!! Kyle speaks truth when it comes to the 20V cover. Both of us were fortunate to get these new with the spark plug cover. Seems that the cover is one of the most elusive parts to find, with some members waiting close to a year and still have not received it.
2011-08-15 01:40:33
#226
Originally Posted by willpekas
mae en curri.


Yo en Pozos, Santa Ana. Tenemos que hacer un ┬┤mini-meet┬┤pronto ....
2011-08-15 19:55:50
#227
My 16ve Engine Bay



2011-08-16 11:53:54
#228
very clean chap
2011-08-16 13:31:49
#229
So what's up with the throttle cable bracket? I'm seeing where some guys can use the stock VE bracket, and some have to move it forward. I tried using the one of the stock VE in the stock location and it has my car revving at crank up no matter how I adjust it. I guess I'll have to move it forward a bit.
2011-08-16 14:05:33
#230
custom bracket pic


works great and has since been painted gloss black. 5 1/4" long
Last edited by Teal97 on 2011-08-16 at 16-54-13.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top