Thread: Silicone coolant hoses?

Any options for silicone replacements for the hoses on the intake side of the engine? There are 3 hoses attached to the piping between the thermostat housing and the water pump/sensor neck. These are the ones I am after.

not interested in the heater hoses.

you mean the hoses for the TB or are you refering to the one big and one small hoses in the back on the coolant hardpipes? For the TB hoses you can just go to any shop or online store and get hose by the foot. IMO, I would go to HoseTechniques.com: Leader in World Class Silicone Hose of Quality, Performance & Style for the Automotive Aftermarket. They also make replacement hard pipe lines in silicone too which you can get on Gspec.com

I have deleted the TB hoses.

Its the hard pipe big and 2 small, there is one small one near the big one and the other small one is about under the VVL solenoids around that area.

Those are the ones I would like to replace with silicone if possible.

I went to ebay and ordered 1.5 inch silicone.

was just looking on Gspec but all I could find was for the highport.

1.5" for the bigger one? what about the smaller ones u know the size offhand

no I have my motor apart for my build and the head and block are at the machine shop currently getting work done.....
The 1.5 is for the bigger ones going to the thermostat.