Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: HowTo: '99 P11 Engine Harness into '00+ P11 - for SR20VE

+ Reply To Thread
Posts: 21-23 of 23
2011-10-25 05:25:16
#21
I guarantee it'll be the best $24 you can spend on your car.
2012-01-26 04:38:39
#22
im swapping a ve into a 99 g20t and running a b14 jwt ecu im thinking ill have to re-pin it for the o2 sensor but will i have to swap o2 sensor, reverse line on egr solenoid,and unplug evap sensor?
2019-02-26 11:23:50
#23
So I just finished the install. 99 p11 auto harness and ecu into a 00 manual p11. I added in the rear o2 harness pins 52,110,112; swapped the interior wires. Crank but no start, no fuel. Even if i apply power to the fuel pump directly still no start. What am I missing?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top