Thread: How to: Wire VE distributor to B13 B14 engine harness.

No problems with mine. Works like a champ.

Thanks for this write up. I will be attempting this with my 92 NX2000.

Just doing my part to clear up the confusion surrounding the VE swaps.

unfortunately the link to the b14 write up does not show any of the pictures for the diagram. By any chance do you have this info?

I don't have the info laying around. A quick search should yield the wiring schematics for you. Repin the plugs, don't cut and solder.

I may have used the wrong approach to this but what I'm doing is using new wire ,braided sleeving and junction blocks, so I used this how to to find out the distributor plug pins to pin it directly to the obd2 connector with a step down harness(nismotronic) and nismotronic ecu.


thanks for the quick reply, I'll keep searching for more info.