Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How to: Wire VE distributor to B13 B14 engine harness.

+ Reply To Thread
Posts: 11-16 of 16
2010-11-22 03:36:56
#11
No problems with mine. Works like a champ.
2011-12-03 04:14:46
#12
Thanks for this write up. I will be attempting this with my 92 NX2000.
2013-03-30 07:34:48
#13
Just doing my part to clear up the confusion surrounding the VE swaps.
2016-03-09 01:32:43
#14
unfortunately the link to the b14 write up does not show any of the pictures for the diagram. By any chance do you have this info?
2016-03-09 02:31:43
#15
I don't have the info laying around. A quick search should yield the wiring schematics for you. Repin the plugs, don't cut and solder.
2016-03-09 03:15:16
#16
I may have used the wrong approach to this but what I'm doing is using new wire ,braided sleeving and junction blocks, so I used this how to to find out the distributor plug pins to pin it directly to the obd2 connector with a step down harness(nismotronic) and nismotronic ecu.


thanks for the quick reply, I'll keep searching for more info.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top