Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

shagspeed's Mentions Received

All posts where shagspeed has been mentioned by other members.

shagspeed's Mentions Received
- All posts where shagspeed has been mentioned by other members.
Posts: 1-11 of 11
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: Idle Surge / Hunting Idle - 200sx SER with Avenir swap
Post: Well I talked to Ben Pila on the phone last week. I expl...
Well I talked to Ben Pila on the phone last week. I explained my issue to him and he wanted to verify that my MAF was at least 18 inches away from the turbo. He was the one who advised me to get ...
2016-07-22 18:17
Thread: Idle Surge / Hunting Idle - 200sx SER with Avenir swap
Post: Yep, I sent an email to them a few days ago and have had ...
Yep, I sent an email to them a few days ago and have had no reply. Figures. I bet if we were some big spender V6 guys, they would be all over it.


shagspeed <-- He knows Clark and worked with t...
2016-07-22 18:11
Thread: Timing Maps for Tuning
Post: shagspeed
shagspeed
2015-06-26 13:05
Thread: CNP/COP conversion for OEM ECU
Post: The 5vref used to power the TPS and MAF is the power sour...
The 5vref used to power the TPS and MAF is the power source I used during prototyping. It works surprisingly well too. But it wont be a permanent design change. The board does have a 5v regulator b...
2015-06-26 10:45
Thread: Degreeing a VE...
Post: could you translate 105* overlap to effective advance/ret...
could you translate 105* overlap to effective advance/retard of respective cams? afterall 29* of additional overall overlap is incredible!

I dont know much people going beyond the +5-5 In/Exh sett...
2015-01-14 15:40
Thread: Degreeing a VE...
Post: Me and Clark aka (Mad scientist at JWT) messed with cam t...
Me and Clark aka (Mad scientist at JWT) messed with cam timing years ago.. On our VVL Stock engine N1 Cams,intake manifold and TB .. We found the more overlap we put the more top end HP was made wi...
2015-01-13 17:51
Thread: Degreeing a VE...
Post: shagspeed has done piston to valve clearance not sure if ...
shagspeed has done piston to valve clearance not sure if he's degreed cams. Shine some light sir.
2015-01-13 06:26
Thread: Opinions about Armonic Performance header
Post: First and foremost I want to apologize to Miko, as I've b...
First and foremost I want to apologize to Miko, as I've been attributing that quote to mr. marsh, not Miko whom "said" it.



shagspeed I have absolutely no clue.
Here's the thread I took that...
2015-01-13 03:53
Thread: 1999 or 2002??
Post: shagspeed has a ECU setup that should be plug and play I ...
shagspeed has a ECU setup that should be plug and play I know that he has been tinkering with. That should get you around majority of wiring & tuning issues so I vote for the 2002 - especially if ...
2014-05-17 04:53
Thread: Tuning for E85?
Post: shagspeed
shagspeed
2014-05-08 02:15
Thread: ITB 12.5 VVL on p28 Honda
Post: Instead of doing a Honda conversion, get a standalone mad...
Instead of doing a Honda conversion, get a standalone made. Megasquirt II would be perfect for you. Contact shagspeed
2014-04-17 23:56
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top