Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

gomba's Mentions Received

All posts where gomba has been mentioned by other members.

gomba's Mentions Received
- All posts where gomba has been mentioned by other members.
Posts: 1-25 of 42
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: Whining noise by RPM -- eletrical issues?
Post: Exactly! gomba try disconnecting the power and groun...
Exactly!

gomba try disconnecting the power and ground (not the RCAs) from your amp.

edit: don't forget to protect the ends so there's no sparky spark! :D
2015-05-17 19:18
Thread: Discuss the future of the national convention.
Post: I ran an extremely successful convention in 2009 with onl...
I ran an extremely successful convention in 2009 with only a road course and a picnic. We had a nominal registration fee for all attendees ($20 or $25 I think). We started with no monies left fro...
2015-04-06 21:05
Thread: Discuss the future of the national convention.
Post: Yes, I'm saying we may not have a 2016 or 2017..kinda loo...
Yes, I'm saying we may not have a 2016 or 2017..kinda looking like that may be true or what a 'convention' looks like will change.
2015-04-06 19:57
Thread: Discuss the future of the national convention.
Post: gomba: You do know the convention is still going, right??...
gomba: You do know the convention is still going, right??

The issue is the roadcoarse portion and the ability to retain one 2 of the last 3 years by either our own doing or the track having issues...
2015-04-06 16:51
Thread: STI injectors @ 4 bar fuel pressure. Anyone have any knowledge??
Post: Thank you BenFenner! That's what I figured would be the b...
Thank you BenFenner! That's what I figured would be the best bet considering the conditions.

As far as the injector dead time (or latency) specs, they are available online, with the caveat bein...
2015-04-03 17:32
Thread: dyno tune today (nismotronic) sr20det, numbers
Post: I was waiting for someone to bring up this taboo, and rar...
I was waiting for someone to bring up this taboo, and rarely understood concept. Perhaps I should delve and try to find another article that is still around, easy to read, and helpful to folks that...
2014-10-27 21:10
Thread: MSD 72lb injector help. -- Injectors bad or tune?
Post: Hey buddy, sorry its taken me so long to reply. What the ...
Hey buddy, sorry its taken me so long to reply. What the resistors do is create voltage division. Low imdepance injectors are just a coil with a very low resistance, think less than one. This is ba...
2014-06-06 00:32
Thread: Short Shifter Q's
Post: How's the short shifter holding up? Mine is still good
How's the short shifter holding up? Mine is still good
2014-03-31 04:54
Thread: Who should be the next Moderator?
Post: Who should be the next Moderator?
Who should be the next Moderator?
2014-03-10 13:05
Thread: Moderator Nomination Thread
Post: As of right now here is the list that will be on the poll...
As of right now here is the list that will be on the poll, excluding members that have declined.

pTen
Kyle
BenFenner
squirlz
LOUROK
ny5speed
Storm88000
AaroNX
b13sr20BB
...
2014-03-10 00:47
Thread: Moderator Nomination Thread
Post: Here are some of my personal nominations from what I've s...
Here are some of my personal nominations from what I've seen user activity. Since my nominations are worth 1/2 nomination (due to conflict of interests), only the members in this list that get seco...
2014-03-08 16:26
Thread: Short Shifter Q's
Post: Hey, Just got done doing this tonight heh I filed t...
Hey,

Just got done doing this tonight heh

I filed the entire hole down to be able to stick it in from within the car, from the top. Also, we did use all 4 washers, but not sure what you mean ...
2014-02-28 05:49
Thread: Short Shifter Q's
Post: gomba Good buy. Took me 2 hrs by myself, would be less ...
gomba

Good buy. Took me 2 hrs by myself, would be less than 45 mins now

I'm running open dp so I didn't have problems with taking off cat etc. Anyway after u take off the cat, get the shield of...
2014-02-28 05:03
Thread: NismoTronic 3.9.005 Update: Set Timing Window and Misc GUI improvements
Post: Kyle gomba (The Help files should update OK now, let me k...
Kyle gomba (The Help files should update OK now, let me know if that fixes things for you).

Another update will be coming later today or tomorrow. This will address lynchfourtwenty 's issue with...
2014-01-09 17:21
Thread: NismoTronic 3.9.005 Update: Set Timing Window and Misc GUI improvements
Post: NismoTronic 3.9.005 Update: Set Timing Window and Misc GU...
NismoTronic 3.9.005 Update: Set Timing Window and Misc GUI improvements
2014-01-08 17:00
Thread: New Year New Changes - Open to Public Discussion
Post: Ok got a test for you guys to look at. BenFenner Kyle Chr...
Ok got a test for you guys to look at. BenFenner Kyle Chriscar gomba

Go to:
Driveline

Method 1:
New Subsection that is a link "Driveline Manifesto". This method lets me link the subsection...
2014-01-07 15:05
Thread: Mike K thinking about Selling Dog 1
Post: SE-Rawkus in all honesty, I will have to agree with you ...
SE-Rawkus in all honesty, I will have to agree with you on several points you made :beer:



gomba - not the "same" setup as the OTS V3. The gentleman that does all the KW north American setup...
2013-10-24 01:12
Thread: The ins and outs of the stock idle control system.
Post: gomba, re-read the description above. It tells you exactl...
gomba, re-read the description above. It tells you exactly how it works.
2013-10-08 12:57
Thread: AICV valve on custom manifold?
Post: gomba, see my reply here: http://www.sr20-forum.com/infor...
gomba, see my reply here: http://www.sr20-forum.com/information-library/50162-ins-outs-stock-idle-control-system.html#post935255


This is the right way to do it. No, there is no restrictor. The AA...
2013-10-04 16:46
Thread: The ins and outs of the stock idle control system.
Post: gomba, you are correct. There is an aluminum passageway c...
gomba, you are correct. There is an aluminum passageway cast into the intake manifold that this device uses as part of the tract to the intake piping. This is a passageway completely separate from ...
2013-10-04 16:43
Thread: Timing chain stretched?
Post: I've tried a diff dist and it didn't work for me in the p...
I've tried a diff dist and it didn't work for me in the past :/ What I have going on is some crack science and that's some pretty hard stuff to fix lol

Glad to hear it fixed your problem though!...
2013-09-14 01:47
Thread: Timing chain stretched?
Post: Good approach to take, I never thought about looking at h...
Good approach to take, I never thought about looking at how far the tensioner was expanded to determine chain stretch, that makes a lot of sense. You also probably want tension on the front side (...
2013-09-13 21:37
Thread: Timing chain stretched?
Post: Okay,I changed the distributor today and got the result I...
Okay,I changed the distributor today and got the result I wanted.At full advance with the old one,18*.Took one out of a box I had laying around,set it at fully advanced where the old dist. was,got ...
2013-09-13 21:22
Thread: Avenir+GTIR turbo
Post: ORLY. Why don't you check out Keo's post above yours. Als...
ORLY. Why don't you check out Keo's post above yours. Also, I said it first if you read the 2nd post in this thread. reading owns you, perhaps? rofl?



If he's using his Avenir manifold and Avenir...
2013-08-06 19:12
Thread: Avenir+GTIR turbo
Post: Reading owns gomba LOL! You just repeated what we said...
Reading owns gomba LOL!

You just repeated what we said with lacking info :rofl:
2013-08-06 19:10
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top