All posts where lynchfourtwenty has been mentioned by other members.
You wouldn't see a ground issue on the gauge itself, since the gauge is what outputs to the ECU and the serial it should always match.
The voltage offset is not a bad thing and as long as you ca...
Can you borrow an ECU from another member with Nistune or Nismotronic? Swapping in another ECU that has a correct (or good enough to run good) tune would give you your answer.
lynchfourtwenty and ...
Wiring the MAF is a part of the process I actually didn't do. My buddy who helped do the swap was the mastermind behind it. He took care of that while I attended to other items.
Reference point: ...
if my memory serves me correctly, the man has a wideband.. could be wrong... if he doesn't.. HE SHOULD GET ONE! lol
Wait. What? WTF? lynchfourtwenty having a post that doesn't talk about a [color= COLOR=#FF0000][b][size= SIZE=6]WIDE BAND O2 SENSOR[/size][/b][/color] ???
http://farm4.staticflickr.com/3390/3...
VIIIIIIICTORYYYYYYYYYYYYYY!!!!!!!!!!!!!!!
AFTER FIVE YEARS MY. CAR. IDLES. COLD!!!!!!!!
Thank you so much family!!! Big thanks to BenFenner lynchfourtwenty and Vadim!!!
I'm sure there are more ...
I don't have EGR or charcoal canister. I'll post a pic later, I just woke up. lynchfourtwenty I know right?! Imagine one of these things solves my idle issue??! You and I spent some time on the...
Recently I was really worried that my G20 had dropped cylinder #1 and the injector was flooding and killed Josh's lynchfourtwenty compression tester. Make absolutely sure before you pull the head....
lynchfourtwenty, how did this setup work for you? Everything working okay?
It's the fuse box next to the driver side headlight. There should be about 4 green fusable links and one brown one. It's a 25amp that is usually the culprit. Make sure you take them all out and pop...
I sold some to lynchfourtwenty and i recall that he's not using them. maybe he would sell them?
I am having a similar issue. Can you be more specific of what fusable link?
My problem:
Car was running with stock Ecu. Got a chip on it with a basic tune. Now doesnt get spark!
Actually it looks like I figured it out
The TPS Sensor Data is off as it was not reading 100% TPS. Went into the fils, and for the section of runs compared in my log, I changed them to 100% TPS an...
I fixed the issue with the help of lynchfourtwenty he pointed to a bad fusable link and I believe I had the fuel line backwards. Now I having a bigger issue with the trans. :/ never ending....
Thanks for the list, BenFenner. I knew about the Turbo Trans-Am, but good luck finding one in a junk yard. The Cyclone or Typhoon, maybe.
lynchfourtwenty, I noticed the same thing about the 90...
lynchfourtwenty
We call it the "Jester" manifold...lmao
http://i71.photobucket.com/albums/i147/nsusammyeb/SANY2589_zpsd5da8100.jpg
http://i71.photobucket.com/albums/i147/nsusammyeb/SANY2588_zps...
lynchfourtwenty
Care to explain a little more indepth on how you got the decimal places back for the wideband reading?? I noticed the same issue as well last night and I was going to email John, b...
I bet lynchfourtwenty can help you out. I see he just signed on.
:D
your starting to sound like someone we know!
lynchfourtwenty Check [url= URL=http://www.sr20-forum.com/844553-post9.html]this post[/url] out, Boostlee found and awesome VD how to article!
Soooo pick it up and bring it here :D. I will ...
One thing I personally run is [url= URL=http://www.sr20-forum.com/415849-post18.html]Enthalpy timing[/url] on my DET, it's pretty good and gained me around 15whp over stock Avenir timing map.
I ...
Vadim - Vadim you are correct. But to be more definitive, the issue with autox is the low speed (not enough flow to the radiator(s) (as in all car heat exchangers) and the constant on/off throttle ...
lynchfourtwenty - Are you just bragging or something? Get out of here! Lol!
Sent from my SCH-I535 using Tapatalk 2