Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

lynchfourtwenty's Mentions Received

All posts where lynchfourtwenty has been mentioned by other members.

lynchfourtwenty's Mentions Received
- All posts where lynchfourtwenty has been mentioned by other members.
Posts: 1-25 of 74
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: What did you do to your NX today?
Post: I agree probably had to do with hitting the arms with the...
I agree probably had to do with hitting the arms with the road i think the welds look pretty much gone and most likely not from the bushings itself from what i can see , but its nice to know and t...
2017-06-04 04:25
Thread: Blow through setup damages standard afm myth or fact?
Post: Where the turbo mice at? lynchfourtwenty zeneffect davera...
Where the turbo mice at? lynchfourtwenty zeneffect daveracer

I would help if I had any insight, sadly, I don't like escargot. :bigthumbup:
2017-06-03 19:27
Thread: What did you do to your NX today?
Post: ...the rear parallel Lower Control Arm bushings.
...the rear parallel Lower Control Arm bushings.
2017-06-03 13:44
Thread: What did you do to your NX today?
Post: Dayuum! What caused it?
Dayuum! What caused it?
2017-06-03 05:52
Thread: What did you do to your NX today?
Post: Yep http://i1317.photobucket.com/albums/t631/lynchfou...
Yep

http://i1317.photobucket.com/albums/t631/lynchfourtwenty/joshs/IMAG0140_zps0f3fwyxt.jpg

To be fair I'm sure they been on the car for years and I've hit some potholes.. luckily we had a p...
2017-06-03 02:29
Thread: What did you do to your NX today?
Post: Nice round of upgrade and what agood looking NX you have!...
Nice round of upgrade and what agood looking NX you have! Watch out for those rear bushings ripping the parallel LCA up. Just happened to lynchfourtwenty
2017-06-02 18:18
Thread: 6 speed swap bolt sizes
Post: lynchfourtwenty could probably tell you...he's done sever...
lynchfourtwenty could probably tell you...he's done several 6-speed swaps
2017-05-20 16:03
Thread: New Member from St.Kitts
Post: oooo welcome to the forum. Nice to have another person on...
oooo welcome to the forum. Nice to have another person on board. Sorry to hear about your problems. Our [url= URL=http://www.sr20-forum.com/driveline/]driveline[/url] section would be the best to r...
2017-01-07 18:07
Thread: Advice on Hard Cold Start
Post: Nice one lynchfourtwenty
Nice one lynchfourtwenty
2016-07-17 12:48
Thread: Thoughts on a full race motor setup
Post: Stock as in stock internals, stock cams and stock valve s...
Stock as in stock internals, stock cams and stock valve springs? I'd have to say you are quite brave if you consistently go over like 7800~ish RPM. Shifting at 8500RPM is built SR20VE territory an...
2016-07-12 08:59
Thread: 730rwhp, 530rwtq SR20VE-T S14 Build!!!!!!!!
Post: Ya I know, but it's a big state lol
Ya I know, but it's a big state lol
2015-12-03 21:17
Thread: 730rwhp, 530rwtq SR20VE-T S14 Build!!!!!!!!
Post: He is implying that is your state ;)
He is implying that is your state ;)
2015-12-03 21:12
2015-12-03 20:09
2015-12-03 15:46
Thread: Crank scraper on Roller Rocker?
Post: lynchfourtwenty
lynchfourtwenty
2015-10-05 22:43
Thread: Battery dies after 3 days of sitting, need help
Post: Exactly what happened to me as well...and what I suggeste...
Exactly what happened to me as well...and what I suggested to lynchfourtwenty
2015-08-24 02:27
Thread: EBC setup -- (ecu based boost control)
Post: lynchfourtwenty , What did you use for your 12v switched ...
lynchfourtwenty , What did you use for your 12v switched source? Thanks Dave
2015-07-03 14:15
Thread: What's this issue?
Post: What's this issue?
What's this issue?
2015-04-09 18:12
Thread: What Did You Do To Your B13 Today?
Post: Damn Dave! Have you been racing around lynchfourtwenty '...
Damn Dave! Have you been racing around lynchfourtwenty 's dirt track in that thing???
2014-11-22 16:01
Thread: EBay tri y header
Post: 4pk775 was a winner! So ve + gspec crank pulley = 775mm ...
4pk775 was a winner! So ve + gspec crank pulley = 775mm length fits and gets the alternator way out of the way

there is a trick to getting it on and it requires 2 people. 1 can be whoever, even ...
2014-11-02 18:23
Thread: iSpy time out, no e-mails, shoutbox auto-refresh scrolls.
Post: The fellow hardcore shoutbox enthusiasts remember it othe...
The fellow hardcore shoutbox enthusiasts remember it otherwise. speedricer Keo 1fastser lynchfourtwenty
2014-07-22 03:17
Thread: Subscription issue
Post: I tried that with a few threads, and still got nothing...
I tried that with a few threads, and still got nothing...
2014-05-12 23:49
Thread: What do you folks think about this VE?
Post: I would recommend you to put new oil, and as lynchfourtwe...
I would recommend you to put new oil, and as lynchfourtwenty put some oil over the lobes before starting, run it for a while and change oil and filter again... i would do oil changes every 1000 mil...
2014-05-12 18:06
Thread: Subscription issue
Post: No... just means the system auto subscribes you to all th...
No... just means the system auto subscribes you to all threads you respond to, you can manually subscribe (what I do).

I'm getting emails just fine to my Gmail, so I don't think it's having issu...
2014-05-12 18:03
Thread: Subscription issue
Post: Wouldnt I then lose all my subscriptions? I bet it has...
Wouldnt I then lose all my subscriptions?

I bet it has somethin to do with the email server or something, there was a similar issue a few years back I think an crim fixed it pretty quick iirc.....
2014-05-12 17:50
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top