All posts where KillerKrossover has been mentioned by other members.
1 |
Just thought I bring some curiosity questions and bring this thread back to life for a possible update any update? Also Mattick22 KillerKrossover is the reason people don't use Mazda 3 eps is due t...
Yeah, we've got all that and will be setting as per say. Just was a little confused with advanced and retard.
We've ordered another multi layered VE metal gasket locally (this was like almost t...
I can't speak for sss4me but I believe he just measured it differently, if he measured it at all. The 20V/20VET gaskets are embossed on two of the outer layers so if you don't separate the layers a...
I really dont know how else to thank you for this KillerKrossover. Many would be grateful!
So just for some comparison data, what kind of gasket thickness are you running and what are your cams ...
Thanks KillerKrossover! You have not only helped me but helped many others who are puzzled as well! A virtual pint on me!
Now, what metal gasket does sss4me have then? since he is saying his is ...
KillerKrossover did mine when I installed the frank S4 cams with SR16 non N1 pistons.
You rock man thanks! Where did you get the pump? I have a feeling mine doesn't work...call it a hunch...
Unfortunately, I have been very slow with this project, lol. The parts have been sitting around for 2 years, hopefully I will finish it up by end of this month. I was going to do a how to write up ...
Once I get my rear end assembled and back in the car I will get back on this. KillerKrossover what kind of changes have you seen? Any improvements? Any advice?
@mirrortint, nope. Thats easyer sad than done. Those's mofu's are only coming out after some heavy pressure or pounding.
KillerKrossover, oke, thanks for the info. Ill use the stock ones than.
SR16/18/20 Long Block Component Weights
LOL, you're welcome.
BTW, the front engine and rear engine mounts on all the different chasiss are "similar style". So what? :rolleyes:
Like... This?
http://www.sr20-forum.com/nx2000/66011-usdm-vs-edm-nissan-nx2000-nx1600-100nx-gti.html
Similar style, happy now 5speed ? :rolleyes:
Awesome work M0J0
We should get a EUDM thread of the differences?
You obviously dont understand what im doing here or maybe because I wasnt that clear when I wrote this sentence
"It is only possible to do this accuratly with the use of a MAP sensor for loggin...
^^ The only way it will be applicable is if you know what TP on the x scale of the Nissan ECU correlates to on a MAP based Honda system...........
In order words, 5speed is correct, almost usele...
^^ That brings up another question ashtonsser (and 5speed)
How do you go about removing the Axle for the carrier while on the vehicle?? I have took Vadim's and Keo's advice and know how to remov...
Oh don't worry Keo, I went out back yesterday and it literally took 3 secs to take off the carrier! So I thank both you and Vadim for the advice ;)
But this is more for a reference and such stan...
Don't worry, I'm not offended, lol. I admit to only reading your first post and the title to this thread, which mentioned B13/B14 axles.
Now to your goal of swapping over B13/B14 axles carrier ...
5speed, I have a 2000 P11T (5 speed, LSD option) which the boot by the damper on the factory passenger side axle has started to separate. I purchased a brand new EMPI axle (which as you know, does ...
1 |