All posts where Dala has been mentioned by other members.
Y2KG20 yea, the oem coil drivers (igniter) are really good quality, you can also use the 300zx ones (even cheaper), they are 6 channel so u don't use 2 of the channels or use them for something els...
Thank you Dala. You can stand those T0-220 components up right, I pushed them down for shipping.
This is very much a prototype/ test board due to the addition of the prototyping area on the righ...
bump for pics of final installation Dala. I have the second set going to be installed.
Thanks, I did some testing yesterday, and found out a shocking thing. I disassembled everything, to replace the 3V lithium battery. When I measured the battery it was at a healthy 3.6V. I then trie...
Dala - The NEMU1 firmware is not compatible with the flex input on the ADC v2 box right now.
We are actually working on a firmware update for both the V1 and V2 NEMU boards to better support the...
Dala The wiper amplifier is incorporated into the wiper switch on the B13, and that would be the prime suspect. Replace switch and report back. :)
Dala has this been straightened out yet?
Oops! Wasn't aware that this bracket was an issue. We fixed the mounts that were mentioned throughout this thread. Glad they worked out Dala.
Go Dala Go!!!!
Dala What cv boot kit did you use? I'll be doing this next week.
Wow I didn't realize it took that many rotations. I must of rotated the engine a good 20-30 times before i freaked out and reset everything.
Ill see if I can get it to match up from rotating ...
Dala, I doubt those plastic tie-straps are gonna hold that! You're better off bolting it to the pallet.
The pleasure is all mine. I try to give back to the community any way I can,because many others have done the same for me as I did for you.
Thats what makes it so great. The other enthusiasts help...
Ya well keep going my friend as you are such an inspiration to us all in the Nx community. I would not have made it this far if wasn't for the phone calls you took from me, and the time you spent h...
Dala Is this compatible with E100?
Installed EDM Roof Spoiler from Dala today
[img][URL=http://s1196.photobucket.com/user/gumby510/media/NXEDM_zpsj4aolrjs.jpg.html][IMG]http://i1196.photobucket.com/albums/aa420/gumby510/NXEDM_zp...
Yeah, $200+ is more than I can do especially this time of year with my little girls birthday and Christmas upon us.
Dala
Is your extra for sale?
If so, how much would you be asking for it?...
My car has a JDM imported engine, with no EGR from the factory. If I had EGR, I would delete it if it's allowed in that state. Search the forums for "EGR delete"
Do you have a high-port SR20...
i have to get the Tee, adapters, and hoses i have everything else.
Also Dala did you delete your EGR or did you plug it off?
Dala
I figured out why my car was having the weird set launch RPM after cold starts.
My TPS was reading 0.47v when cold and the ECU was recognizing this as 2% throttle.
During my cars warm...
Woah, let's solve this together then! :)
I'm assuming that my mishap with the launch control activating in second gear was due to that I uploaded a .tcd with the key on the ON-position. Maybe it...
Dala
Did you figure out the issue? My car started doing this also.
A little while ago you posted something about having an issue with the set launch rpm on the tach on cold starts. My car also...