nismo94tuner's Mentions Received

nismo94tuner

Tanks: When permitted by class regulations, fuel tanks located outside body and/or frame must be enclosed in a steel tube frame constructed of minimum 1 1/4-inch O.D. x .058 chromol...

nismo94tuner, are you taking about the wire that goes from the ignitor to the coil, then ecu (also the tach signal)? Or the signal from the ECU to ignitor?

nismo94tuner we got a gear stack from a known reputable SR20 mechanic whith gears bound up just like that. The problem I believe was that the gears were pressed on to the shaft incorrectly so that ...

Burnt out resistor on the aem box.... 5volt....
Look into that... nismo94tuner

Putting on a carbon fiber hood thanks to nismo94tuner !! :)

If you're close to nismo94tuner hit him up. He has a prototype that was supposed to be dyno'd but the guy tore his car up before installing it.

Can't wait to see this car drop kick nismo94tuner at the track.

I will look for a complete head nismo94tuner

And I will keep that in mine Mr. Sentra, thanks

What's their page on FB? nismo94tuner

b13/14 3 piece front end, for real this time

P11 manual will work,but I think only the 99 are cable.You can convert it,but again thats not something you want to have a shop do(at least I wouldnt.)

FYI I have done motor swaps and trannie swap...

nismo94tuner, it bolts up, but because of the hydro setup and a few other subtle differences it don't bolt up the same

Bes, nismo94tuner hit up Aaron boostednx...i sold him one a while back and i know he is not using it because he went 6spd and it don't fit

Dialed in correclty all damn day!!! His car would only need a cage.

nismo94tuner lets make this happen ;)

Thanks nismo94tuner and Kyle that helped me out alot

Nvm..

It is. Not sure what crack the rest of these fools are smoking. =]



nismo94tuner knows what's up.

Thanks man but I can't take credit for all of this. I hired Jamie as the pilot for the day as I showed up late and thing kept getting more interesting as the day went on and grudge matches came at ...

Killer.

nismo94tuner :D :bigthumbup:

No pics, but got my fidanza flywheel in today, along with my act extreme pp, thanks nismo94tuner, and act sprung puck disc with a oem throw out bearing. To top it off with some redline heavy sho...

Oo hey nismo94tuner ....... Eat my ass

Yeah that bumper is the spare usdm bumper I have. Did it when the car went on the serious diet. I have my shaved jdm bumper but I am too scared to cut into it and hack it up like this one lol. Than...

Having taking out my baby from the car seat in the back is my excuse.

Damn buddy, your slacking there. Don't you know to ALWAYS recline your seats back and NEVER leave them forward like that. Lol. JK.

On a serious note, my dad always pointed it out to me when I le...