All posts where Vadim has been mentioned by other members.
Vadim, once I get all sorted I will grab the rest of the pics today :)
Oh don't worry Keo, I went out back yesterday and it literally took 3 secs to take off the carrier! So I thank both you and Vadim for the advice ;)
But this is more for a reference and such stan...
I normally leave the carrier on and just remove the axle. with the help of the BGH, it's little to no work really, it's actually more work to take the axle off with the carrier.
didn't Vadim and ...
Thanks Keo! Exactly the answer I was looking for!
P.S Hammered the bracket off the axle like you and Vadim said. Worked like a charm ;)
Okay. I just wanted to confirm what JWT has written up is correct for my ECU. I really don't feel like frying it.
So is the 98-99 ECU considered a 32bit? or is it still a 16bit with just a diff...
Removed those steps they don't apply. Keep the white wires connected the way they are.
Vadim
Solder/crimp the white wires to what?
Doh sorry man was under the P11 & Fozzy all day.
Cliff Vadim coach Chriscar wnwright AztecSR20
Vadim
If you go to Valvolines web site it will say that they are API GL-4 * certified (note the asterisk)
Then if you read where the * leads to, it says....
"In Synchronized manual transmission...
Wow. You must have just barely read my response at all if you think for one second that I care at all about not being able to use the rwd engine. My response had nothing to do with the thing. I ...
If you report your post, (click on the exclamation mark next to the "online") and request it to be moved to the turbo section, a moderator will do so for you!
GL
Thank you! I will do that!
I'm going to mention Vadim and suggest that maybe (if you'd like), this thread get moved to the "Turbo" section. You will get a lot more views/help over in that area of the forum.
Vadim update, please!
If pop charger made no noise difference then you either haven't redlined it or your car is too loud to begin with :).
It's 9 seconds you newb :-P
Seat of the pants bumping up timing d...
I'm going to install a SSAC header and see if it helps a little. I need to do some cam comparisons, I'm not sure if the S3R cams would hurt as I won't be doing any reving with this car and low end ...
No.
Upload image is ONLY a temporary upload of the BIN while the ECU is on. If you upload image and shut the car off, all changes after the last burn will be lost. The burn options writes to the b...
instead of hitting burn, try the upload imagine to ecu button you shouldn't need to burn after that, the nistune an calum boards are different so maybe thats why. i think the burn button is just li...
Vadim still busted.........
Host is somewhere else or send me and I will host if for ya!