All posts where ebinkerd has been mentioned by other members.
Board received, just shot ebinkerd a mail. Will be posting some stuff soon!
ebinkerd
I understand exactly what you are saying, and I don't disagree with any of that. I've been working with electronics for a few decades. ;) It's not unusual to see various 'grounds' at...
unijabnx2000, I'll give you a quick synopsis.
- I saw one, then three, then dozens of Classified Ads in the regional sections.
- I deleted/locked those threads according to a rule against this tha...
Hey ebinkerd, could you please tell me what injustice you're currently fighting against so I can try to address it? Right now I guess I'm having a hard time following you. You were making relevant...
ebinkerd, I have copied your reply to mirrortints to the classified rules discussion thread so I can reply to it there.
Please see my reply there: http://www.sr20-forum.com/server-news/41067-rules...
ebinkerd, you have made some very pertinent points. It is extremely confusing right now what is and isn't allowed with regard to posting classified ads in the regional sections. Bear with me, I had...
I have no reason to report any of these threads, they are not detrimental to how the site functions. The examples I used were to get a point across that the action you've taken are not necessary an...
ebinkerd, can I ask you a question?
How come you never personally reported any of these threads to the forum staff?
ebinkerd, I have moved this discussion of the classified rules to the appropriate thread so everyone on the forum who is interested can find it.
Now those who are interested in the proposed compro...
Why are people that are banned from selling even allowed on this site anymore? If that's the driving force behind this, then all the craigslist links need to be removed as well, because it also all...
ebinkerd, I apologize that this seems to have been sparsely unenforced for long periods of time. The recent crack-down does seem to leave a lot to be desired. A lot of that is the forum staff's fau...
ebinkerd After putting two tanks of E70 thru the system, the LCD shows an ethanol content of 67%, which seems well reasonable.
342Four If I were to make a plug n play kit, I would only include a...
ebinkerd I was referring to the 'crankshaft reference signal' along with 'crankshaft position signal' when I said the shielded wiring. It is pins 22 & 30 which combine into one and pins 31 & 40 whi...
ebinkerd What are you referencing here? ^^^^^
No LSD haha. Dem open diff single peggas lol.
Thanks though man.
No it does not! I noticed that immediately. In what way do you think it helps?
There's no way I could swap one on anyways, ...
FSM quoted 145 - 202 ft-lb. of torque for the axle nut.
ebinkerd speaks from experience. Heres a pic of what happens if the washer and castle nut is not there...it will eat the cotterpin eventually from torque,and start to loosen anyway leaving slop.......
I'm super confused. I'm about to install this resistor box and it seems I originally installed the resistors incorrectly.
I quoted above that the resistors were installed on the individual pins go...
ebinkerd and I live only about an hour away, on any given weekend, I'm usually. grilling out and doing a lot of hanging out.
y'all should come down.
ebinkerd
I promise you, considering the fact that people pay $150 for a set of headers and continue to do so even when Hotshot finally got it right in their later gens (and subsequently got cop...
Nope, I got that. Figured I would throw that out there considering all people were doing was bitching about no other options. I don't know about a lot of people here, but I for one do not like drop...
ebinkerd I think you missed the issue. The issue is NOT the design, but the fact that to get a manifold that cheap, you have to sacrifice quality in several areas, and material and fabrication 9 t...
se200 Unfortunately I don't see anyway to get a brace to keep you 5th. Between the Gear, Bearing and selector on the 5th there would be no space.
ebinkerd If you look at a stack setup you'll see ...