Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

D-Unit121's Mentions Made

All posts where D-Unit121 has mentioned other members

D-Unit121's Mentions Made
- All posts where D-Unit121 has mentioned other members
Posts: 1-25 of 31
Thread Title / Post Title / Post Preview
Posted By / Posted At
Forum Section
Thread: New member from Atlanta
Post: now thats what im talking about loudoghendrix Let the r...
now thats what im talking about loudoghendrix

Let the rebuild begin! I have lots of parts if you need anything.
2016-12-22 21:40
Thread: Post Your B14 Pictures (Not So Silent)
Post: ztunedsr20 They are actually 16" wheels. I did use ...
ztunedsr20

They are actually 16" wheels.

I did use to have a set of 15" rota grid's on the car but wanted something a little taller to help with traction.

Yes 11" rotor.
2016-10-21 16:36
Thread: HELP HID RETROFIT for b14 kit
Post: Thanks for the info speedricer Soon I will actually ...
Thanks for the info speedricer

Soon I will actually be able to see at night.
2016-08-08 17:11
Thread: Flexsensor+NEMU1+NEMU2 ADC box not working
Post: Dala has this been straightened out yet?
Dala has this been straightened out yet?
2016-05-17 12:42
Thread: A few timing questions
Post: Wow I didn't realize it took that many rotations. I must...
Wow I didn't realize it took that many rotations. I must of rotated the engine a good 20-30 times before i freaked out and reset everything.

Ill see if I can get it to match up from rotating ...
2016-02-15 17:37
Thread: Full NX build
Post: You tag with "@username" without the quotes. example: ...
You tag with "@username" without the quotes.

example: Christapp89
2016-01-03 20:19
Thread: TunerView App Testers Needed!
Post: Great work zeneffect I will have to look into double d...
Great work zeneffect

I will have to look into double din options that are similar in software and hardware as your single din.
2016-01-03 16:40
Thread: NismoTronicSA - NEMU2 Updates
Post: Haulin200sx these are available. You have to email John...
Haulin200sx these are available. You have to email John to get one.
2015-10-09 23:34
Thread: Knock
Post: Before you loose your mind trying to find knock, you may ...
Before you loose your mind trying to find knock, you may want to check the integrity of your sensor. Mine is bad and gives me similar readings as you zurud ,but I just disable it because my balls ...
2015-08-20 01:04
Thread: cheap fix for camber on my nx?
Post: Kyle My driver side has excessive camber. I put a 1.7Â...
Kyle

My driver side has excessive camber. I put a 1.7° camber bolt in the car and it still has 2.0° of negative camber. The car is also at stock ride height it use to be slamed before I had i...
2015-08-14 13:32
Thread: Feature Request
Post: I am allready using boost by gear. I am running gate pre...
I am allready using boost by gear. I am running gate pressure in the lower gears and still have spinning issues. With an EBC you can not run lower then gate pressure.
2015-05-18 17:35
Thread: Adjusting ride height with a rear beam
Post: zeneffect Yes I am spinning the strut into the housing...
zeneffect

Yes I am spinning the strut into the housing. That is how I am changing the distance between the housing and the spring.

The preload on the springs is where the Manufacture recom...
2015-05-12 13:47
Thread: Flex-fuel sensor output
Post: Y2KG20 Great test results. Is the android app from fisk...
Y2KG20

Great test results.

Is the android app from fiskafan from sweeden on the FRS forums?
2015-04-24 02:27
Thread: Flex-fuel sensor output
Post: Flex-fuel sensor output
Flex-fuel sensor output
2015-04-10 05:18
Thread: TunerView App Testers Needed!
Post: TunerView App Testers Needed!
TunerView App Testers Needed!
2015-03-30 10:33
Thread: Flex-fuel sensor output
Post: Dala its cleared Thanks!
Dala its cleared

Thanks!
2015-03-24 19:59
Thread: Rad fan high speed
Post: Rad fan high speed
Rad fan high speed
2014-11-30 23:02
Thread: Rad fan high speed
Post: Rad fan high speed
Rad fan high speed
2014-11-30 23:02
Thread: Need help sourcing P10 Non-LSD axle part #
Post: Kyle , Yes OEM numbers will help him. Autozone has a O...
Kyle , Yes OEM numbers will help him.

Autozone has a OEM part number cross refrence thingy.
2014-09-04 21:05
Thread: ssac gaskets?
Post: Keo 1 1/2 years and counting
Keo

1 1/2 years and counting
2014-08-28 19:38
Thread: Idle Control Valve in Central FL
Post: Agent Nupe can both the solenoid/valves be found on the ...
Agent Nupe

can both the solenoid/valves be found on the ga?

my vvls iacv just took a dump
2014-06-02 13:45
Thread: Launch control cutting my rpm randomly
Post: Dala I figured out why my car was having the weird set...
Dala

I figured out why my car was having the weird set launch RPM after cold starts.

My TPS was reading 0.47v when cold and the ECU was recognizing this as 2% throttle.

During my cars warm...
2014-05-15 17:41
Thread: Launch control cutting my rpm randomly
Post: Dala Did you figure out the issue? My car started doin...
Dala

Did you figure out the issue? My car started doing this also.

A little while ago you posted something about having an issue with the set launch rpm on the tach on cold starts. My car also...
2014-03-17 12:46
Thread: Best light weight flywheel for the least amount of money?
Post: blackb15 Are you trying to use the automatic flywheel bolts?
blackb15 Are you trying to use the automatic flywheel bolts?
2014-02-27 22:03
Thread: Buyer Beware: ccrelan
Post: sorry to here you got bum parts. make sure you leave...
sorry to here you got bum parts.

make sure you leave ccrelan some negative feedback with a link to this thread.

also I would keep on bothering him for a refund.

ccrelan you should make...
2014-02-12 23:39
Icon Legend and Forum Information
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Users Browsing this Forum
There are currently ? users browsing this forum. (? members & ? guests)
StubUserName

Back to top