All posts where gomba has mentioned other members
Hey,
Just got done doing this tonight heh
I filed the entire hole down to be able to stick it in from within the car, from the top. Also, we did use all 4 washers, but not sure what you mean ...
Wait a second...is that an N/A VE? Look at his AFR! Goes at or below 10:1 on first run LOL...there's your problem! Unless his resonator was causing it to turn stupid rich (which could have been tun...
Nice, I think this will help people going forward!
-G
What should the base idle timing (as per the ecu) for the tune you gave to vqman for his VE be set to? His base idle timing is currently @ 5* as per the crank pulley.
-G
I once got on a highway without torquing all the lug nuts down and that was a fun time. Pulled over and was able to take lug nuts off by hand with tire on the ground lol...shit happens, give the gu...
I think my AICV is dead..I put it on my custom manifold and the car still can't stay running until the car is warm without cracking the throttle. I am missing the IACV though. Hopefully will have t...
I've tried a diff dist and it didn't work for me in the past :/ What I have going on is some crack science and that's some pretty hard stuff to fix lol
Glad to hear it fixed your problem though!...
ORLY. Why don't you check out Keo's post above yours. Also, I said it first if you read the 2nd post in this thread. reading owns you, perhaps? rofl?
If he's using his Avenir manifold and Avenir...
The more I read about hood spacers, the more I can see where MCarp22 is coming from. It seems to do ok under 40mph, but after that air is being sucked into the engine bay and presumably distorting ...
Clown Shoe sighting @ 1:17?
BenFenner
http://www.youtube.com/watch?v=83Y7_TLW2q0
I'm looking forward to the videos from the track as well ;)
btw, nice photos!
I really like these:
http://cdn.c.photoshelter.com/img-get/I00005FK01XG6Of4/s/750/750/SE-R-Convention-Track-Day-Atla...
Ya I did it with the hose pinched which gives me the same readings as taking it off.
ebinkerd: Your PM box is full, but the tune is in the Calum section:
http://www.sr20-forum.com/rom-ecu-tun...
MSD 72lb injector help. -- Injectors bad or tune?
Calum's values for the TP and RPM scales on the b14 are correct, but reversed in his post. In other words, where you see 'TP' put RPM and visa-versa.
Vadim: Can you please fix this?
Wrong:
B1...
Ya I actually ended up getting them at autozone, but it's basically the same thing. It's called a 'fuel retainer clip'. Just search for clips from a '93 Pontiac Grand-am V6.
Sure I'll see what I...
eggman: You may want to check out a thread I made in the road racing section regarding preparing a car for road course. Decent amount of info in there. It was my first track day:
http://www.sr20-f...
Hey guys( ivanorcan Kyle),
Just installed this tonight! Wow, what an improvement! I was going around a round-a-bout so quick I was getting sick lol
What's even better - the install was...
Hey guys( ivanorcan Kyle),
Just installed this tonight! Wow, what an improvement! I was going around a round-a-bout so quick I was getting sick lol
What's even better - the install was...
ivanorcan : any luck?
I'll wait for ivanorcan to do the install this weekend. I already placed an order for a Whiteline, but I as well have a 3" exhaust. If he can't get it to fit I guess I'll have to resell it and ...
I'll wait for ivanorcan to do the install this weekend. I already placed an order for a Whiteline, but I as well have a 3" exhaust. If he can't get it to fit I guess I'll have to resell it and ...
Vadim, can you also please post/update 'old' k-values for Z32 MAF? By using your formula and the k-value of 399 on most of the 370@ 4 bar (427cc) tunes I could find, it appears stock k-value on z32...
I think I get 90% of it, but I'm still missing the 10% if that makes sense.
BenFenner : I still don't fully understand all of this, but I think I just need time to review this thread in more detail.