Boostlee's Mentions Made

Koni 8611-race question (custom housings and fitment question). Help

Koni 8611-race question (custom housings and fitment question). Help

Koni 8611-race question (custom housings and fitment question). Help

Forget it................

Keo if you make your way up to JK (read: finish your P11), I'm taking a day off work.............And taking a trip on one of those flying pigs which will suddenly be abundant :D

OBD-1 G20 ecus are also compatible if my memory serves me correctly from what John told me the last time I was down there. I think it was something along the lines of how many outputs the ecu had.
...

Storm88000: Use Rotella "T" 15W-40 for the turbo vehicles (held up well on my last trackday. About 1.5 hrs of track time on a T3 turbo @ 10-12lbs with a good amount of flogging!)

Its less than $20...

M0J0 As I said I "heard" it can be implemented but never could be bothered ;)

Vadim and myself had a discussion about this a few months back ;)

To me, the Calum is seemingly outdated as JK is...

M0J0 As I said I "heard" it can be implemented but never could be bothered ;)

Vadim and myself had a discussion about this a few months back ;)

To me, the Calum is seemingly outdated as JK is...

Ninja EDIT if you missed it BenFenner ;)

^^ The only way it will be applicable is if you know what TP on the x scale of the Nissan ECU correlates to on a MAP based Honda system...........

In order words, 5speed is correct, almost usele...

Try GregV

He is very good at getting things to customers stat!

Keo get your ass in gear!! :D

Thanks for the response guys! Turns out I may give it a shot if the correct coupler comes my way. That or modify the housing to fit the N62 MAF.

Vadim, I will be down i the VA beach area some ti...

^^^ duesmandella

Sure

Hankook*Ventus R-S3 225-45-15

They come in 225-45-50 option

Also

[url= URL=http://www.discountedwheelwarehouse.com/Discount_Tires.cfm?pn=Toyo-160680&pID=9486]Toyo R888 2...

V1rg1n1azf1nest feedback!

coach, I did this last night on the passenger side. One thing to note: on the P11, you will have square lock washers which prevent the Inner Rod from "walking off' the rack itself. I heard of them ...

coach, I did this last night on the passenger side. One thing to note: on the P11, you will have square lock washers which prevent the Inner Rod from "walking off' the rack itself. I heard of them ...

coach, cortrim1 what bolts did you end up using??

I do know the studs are M 10x1.25 with circa 38mm length and the bolts are M10x1.25. Is this correct??

Also, I checked around for the ARP var...

coach, cortrim1 what bolts did you end up using??

I do know the studs are M 10x1.25 with circa 38mm length and the bolts are M10x1.25. Is this correct??

Also, I checked around for the ARP var...

coach, cortrim1 what bolts did you end up using??

I do know the studs are M 10x1.25 with circa 38mm length and the bolts are M10x1.25. Is this correct??

Also, I checked around for the ARP var...

Keo

Ok Vadim, as requested. Sorry for the delay, I ran out of work Friday before taking pics (where I left the Moogs).

Outer thread length - 2.172 inches / 55.1688 mm
http://i15.photobucket.com/a...

Vadim, once I get all sorted I will grab the rest of the pics today :)

Vadim, I will take care of that when I get to work tomorrow!

Thanks Keo!

^^ That brings up another question ashtonsser (and 5speed)

How do you go about removing the Axle for the carrier while on the vehicle?? I have took Vadim's and Keo's advice and know how to remov...