Boostlee's Mentions Made

ztunedsr20, I read the thread multiple times.........No need to read it again.

I did also see the shipping label from the first post hence why I went back to USPS to see if I could get a shipping ...

ztunedsr20

Any updates on text z tuned??

jimbo_se-r ; A car sitting still, does not exhibit the true airflow effects within the engine bay and over the vehicle. Once the vehicle is in motion, those stagnation temps may or may not be the s...

jimbo_se-r , The lip needs to be, at a minimum, as tall as the height of the highest slat. And yes it does make a difference. It's all about manipulating airflow and direction.

Below is a very il...

I am not entirely sure on that (for the 8610-RACE compared to the OTS yellows atleast). There is a valving difference between the OTS yellows/maximas and the 8610-RACE (the price difference alone b...

Good stuff!

However, according to the website it is a "EMRA RACE, OPEN WHEEL & TIME TRIAL EVENT @ NJMP's Lightning". I do not see anything about a HPDE/trackday/PDX/etc. From my little digging, th...

He is implying that is your state ;)

Re-spect

:eatpop:

Join Date 12-11-07
Current Activity Viewing Thread Marsh Tuning and Morfius Performance
Last Activity Today 01:12 PM

marksr20 marksr20 marksr20 marksr20 marksr20 marksr20 marksr20 marksr20 mar...

Isfahan, they have purportedly done similar work in the past.............Mark was very clear in stating "It could be done in 2 weeks"...........

No QC, no communication, no proper strategy plann...

mirrortints: Understood. My questions are still viable questions however. The vehicle was clearly unprepared for tuning, so at that point, why proceed? And for a business owner to have no idea on t...

mirrortints: Understood. My questions are still viable questions however. The vehicle was clearly unprepared for tuning, so at that point, why proceed? And for a business owner to have no idea on t...

Atleast one of those was no fault of the planning committee mirrortints (Nelson Ledges). Another was an oversight by the planning committee IMHO.

What would be the cost/process to upgrade from V1 to V2s JKTUNING??

Will your car be ready mirrortints??

hammerin hank; Somebody get this man a damn beer!

Glad somebody apart from Joe (and in addition, Ben) said it!

I am willing to pony up if it allows this place to survive!

The "leadership" keep ...

^^^ This! I have no idea what's currently on the car!

Justin, in addition you also blidnly swapped power and ground wires and could have very easily fried the MAF in the process

Do you have a...

UPDATE:

So after figuring what latency for the 800cc injectors, I inputted them into Nismotronic and alas, the car still wouldn't idle. So with this, I sent John my file and low and behold, I was ...

UPDATE:

So after figuring what latency for the 800cc injectors, I inputted them into Nismotronic and alas, the car still wouldn't idle. So with this, I sent John my file and low and behold, I was ...

UPDATE:

So after figuring what latency for the 800cc injectors, I inputted them into Nismotronic and alas, the car still wouldn't idle. So with this, I sent John my file and low and behold, I was ...

gomba: You do know the convention is still going, right??

The issue is the roadcoarse portion and the ability to retain one 2 of the last 3 years by either our own doing or the track having issues...

Thank guys for the comments!

JKTUNING, I did find a set of baseline latency values over at NASOIC. I am going to give those a shot and if it comes to it, I will send it over (or email you) if I ...

Thanks! I will tag John.

JKTUNING, any input??

Thank you BenFenner! That's what I figured would be the best bet considering the conditions.

As far as the injector dead time (or latency) specs, they are available online, with the caveat bein...

Thank you BenFenner! That's what I figured would be the best bet considering the conditions.

As far as the injector dead time (or latency) specs, they are available online, with the caveat bein...