All posts made by Serban that members have liked.
Ray's 98 SE was the reason I got my first ticket back in 98 or 99. He was down in south FL and wanted to see how his stick SE would do against my B13 with a pop charger and exhaust. Guess who got t...
Yeah, he offered to pay for the ticket, he circled around a few times, I had about 4 cop cars there trying to decide what kind of ticket to give me. Back then there wasn't a street racing ticket op...
Ray's 98 SE was the reason I got my first ticket back in 98 or 99. He was down in south FL and wanted to see how his stick SE would do against my B13 with a pop charger and exhaust. Guess who got t...
Ray's 98 SE was the reason I got my first ticket back in 98 or 99. He was down in south FL and wanted to see how his stick SE would do against my B13 with a pop charger and exhaust. Guess who got t...
I was hoping this whole thing got sorted out after so many years, sad to see that you can't enjoy driving your car the way it should be driven, Shawn.
I'd be able to do them with the tabs .
I'd be able to do them with the tabs .
By the way, here is how the car sits with the Konis on all 4 corners. The front was lowered maybe 1/4".
[url= URL=http://s192.photobucket.com/user/fast91ser/media/91%20SE-R/20160309_130638_zpsbf...
By the way, here is how the car sits with the Konis on all 4 corners. The front was lowered maybe 1/4".
[url= URL=http://s192.photobucket.com/user/fast91ser/media/91%20SE-R/20160309_130638_zpsbf...
Koni upper spring seats are machined and ready for use! These are for a 2.25" spring, but Koni has an insert (probably Delrin), that acts as a bearing, which is nice, now I don't need to worry abou...
Thanks, I actually got confirmation from a friend about using the U13 pedal. Looks like that's the way to go.
It's tricky, I messed around with this a bit
91-92 sr has a certain compressor, lines are different. 93-99 sr and ga use the same compressor, lines are routed differently, but bolt up. P11 and b1...
1.6 lines goes down in front of the alternator and a/c compressor then cuts across, rather then cutting across the top, and down near the manifold.
[url= URL=http://s192.photobucket.com/user/fas...
I agree with everything you said. I've got a 1.6 line on my B13 and it's nice and out of the way. No need to ziptie it to the radiator hose in fear of having it touch the manifold.
You need to get P10 rear calipers, and find rotors for a Japanese built NX with ABS, even though they were all Japanese built, both ABS and non ABS had the same size rotor (same as SE-R), but there...
I can build some if you need them. And before you buy the 8611s, let me see if I can get you a better deal.
The ride is great, reminds me of the stock suspension when I had my Mazdaspeed3. It'...
By the way, here is how the car sits with the Konis on all 4 corners. The front was lowered maybe 1/4".
[url= URL=http://s192.photobucket.com/user/fast91ser/media/91%20SE-R/20160309_130638_zpsbf...
By the way, here is how the car sits with the Konis on all 4 corners. The front was lowered maybe 1/4".
[url= URL=http://s192.photobucket.com/user/fast91ser/media/91%20SE-R/20160309_130638_zpsbf...
By the way, here is how the car sits with the Konis on all 4 corners. The front was lowered maybe 1/4".
[url= URL=http://s192.photobucket.com/user/fast91ser/media/91%20SE-R/20160309_130638_zpsbf...
Also, just a note, I made these tubes without the tabs for the rear sway bar, so if you're using a stock sway bar, price will be a little more.