All posts made by coach that members have liked.
You may want to warn the dog and small child that they could get sucked up by the massive turbo!
Project looks good man!
Actually any flange head bolt will work as long as it has a surface area close to the stock washer or any other thick washer like the stock ones as said above. I had to use bolts on a couple manifo...
Anything open defeats the purpose and if you run one port open, you may as well run them all open. The best scenario is to buy two legitimate catch cans like the saikou michi or Radium Engineering...
Wilwood 260-10375 Compact Remote Combination Master Cylinder
I found the Wilwood kit, but what is the adapter plate you have? Is that what was mentioned above to replace the booster? I assume ...
Getting Ready for Convention!
Getting Ready for Convention!
Getting Ready for Convention!
All motor guys talking some serious shit, but I haven't seen any of them go under 10 seconds? There comes a point where you simply need more than the motor can produce and that is when boost kicks...
yeah, the 2000-2002 P11 changed to a different 32bit ECU and a lot of things changed in the harness. For a 99 P11 you are set.
Brent
Ignition 0,18,6,12
Injection 12,6,18,0
Brent
Re: Aem ems ignition/injector phasing
Reminds me of this one: Wholesale UNIVERSAL 100mm THROTTLE BODY, $47.08-57.17/Piece | DHgate
Can't wait to see how it works out.
Brent
Yes, these are meant to relocate the tie rods under the knuckle to reduce bump steer and are a stronger part. the factory ball joint style tie rods are replaced with these.
Brent
THey got the kits in and will be shipping starting tomorrow through Saturday. FINALLY!
Brent
I was so excited when I sold this turbo setup to him because I knew he was going to get into low 9's with this and break past the barrier he had hit. Not long after though he started slowly gettin...
I love the coolant swirl pot/tank setup to the overflow. This is such a nice clean build!
Brent
I ran an HKS intercooler similar to Boomstick there on my brother's NX and ran IC pipes through two holes we popped in the core support as he did. It worked well, but there wasn't a ton of airflow...
the rears typically don't get hot enough to generate the massive amounts of gases that you see with the front brakes. It depends more on pad material really, but i haven't found a reason to go to ...
I truly hate GB that go like this. Everyone paid up front and they still take their sweet time!
Brent
Um, disco potato plus cams means you will need more injector like Ben said unless you plan to run low boost all the time. At least go to 555cc or 740cc injectors for the head room and safety facto...
the rears typically don't get hot enough to generate the massive amounts of gases that you see with the front brakes. It depends more on pad material really, but i haven't found a reason to go to ...
Exactly Manny, once you have that bracket you will see the hole that lines up to bolt it on.
Nevermind, I found it in the GB thread. He posted yesterday two weeks till shipping.
Brent
Separate issues, first time was due to the person we share server space with doing upgrades on his forum that messed up ours. The second time was due to an attack on the server that resulted on th...