coach's Likes Received

Skip Teflon on the angled or flare fittings, just use on pipe or straight fittings.

Voltage regulator in alternator over charging?

Sent from my SCH-I535 using Tapatalk 2

It's still available across the street.

Yeah flange is rotated on the gtir a bit

Sent from my SAMSUNG-SGH-I747 using Tapatalk

NX, I explained above, tank and pump are in the hatch so ran lines to get to the front. You can run them along the tunnel inside the cab or along the side, either way. pump is a Jabsco Centri-pupp...

Yup, that is why I told him to check them and replace the rubber lines.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I am tired.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I would run act.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I am tired.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I am tired.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Clock the center section

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Clock the center section

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Clock the center section

Sent from my SAMSUNG-SGH-I747 using Tapatalk

NX, I explained above, tank and pump are in the hatch so ran lines to get to the front. You can run them along the tunnel inside the cab or along the side, either way. pump is a Jabsco Centri-pupp...

Here is one of my G20:
https://db.tt/Vw9wWXNS
https://db.tt/eNA8UmNS

This setup has about two feet of IC piping, all 2.5". The pump is mounted on the trans driver side mount and water lines run t...

http://photos.motoiq.com/MotoIQ/Project-Cars/LSR-S13/i-VZhP9Vk/1/L/6E5A1553-L.jpg

Here is the MotoIQ SR15VET now running water/air IC.

Brent

That is old news and you are reinventing the wheel a bit. Only thing different is you ate taking a non Nissan specific box and mating to a Nissan. Not that difficult.

Sent from my SAMSUNG-SGH-I747...

It came from a car that I am pretty sure the guy got it in the original GB on them. The NX has been on jack stands since 2003 when the owner was killed in an accident in his P10. I have been work...

Re: Call out thread !!!

Never had an issue with cables. Had the stock cable in my 91 for 230k miles plus with ACT XT pressure plates and ran that setup in multiple cars with no issues. Breaking cables is due to bad adju...

Piece it together. There are no solid kits out there in my opinion. There are threads discussing what you need to get.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Re: Call out thread !!!

No, lol. I do have a PAR straight cut dog box and quaife diff and a lovely set of JWT cams though! LOL.

Brent

Re: Call out thread !!!

Never had an issue with cables. Had the stock cable in my 91 for 230k miles plus with ACT XT pressure plates and ran that setup in multiple cars with no issues. Breaking cables is due to bad adju...