eric96ser's Likes Received

I’m still in the Nashville area and have my car, but it hasn’t moved under it’s own power since 2013. I have a DE-T powered Sentra SE Calum gave me, but it’s been down longer than that. I...

I’m still in the Nashville area and have my car, but it hasn’t moved under it’s own power since 2013. I have a DE-T powered Sentra SE Calum gave me, but it’s been down longer than that. I...

Variable intermittent wipers

Variable intermittent wipers

You might want to make something to cover up that hole in the bellhousing where the crank angle sensor was.

You might want to make something to cover up that hole in the bellhousing where the crank angle sensor was.

It's also a good thing to either give the corner workers some extra cash for working all day, or grab a few guys to man the corners while they have some fun at the end of the day.

We did that in...

It's also a good thing to either give the corner workers some extra cash for working all day, or grab a few guys to man the corners while they have some fun at the end of the day.

We did that in...

It's also a good thing to either give the corner workers some extra cash for working all day, or grab a few guys to man the corners while they have some fun at the end of the day.

We did that in...

There was a group like this called SERCA. It was started when these cars were still in production, and the community was bigger than it is now. I don't remember what the costs were, but it was no...

As someone who has organized a convention, I feel like I can add to this thread. Back in 2003, we were scheduled to use a track in OK (forgot the name), but either the owner or the track went bank...

As someone who has organized a convention, I feel like I can add to this thread. Back in 2003, we were scheduled to use a track in OK (forgot the name), but either the owner or the track went bank...

As someone who has organized a convention, I feel like I can add to this thread. Back in 2003, we were scheduled to use a track in OK (forgot the name), but either the owner or the track went bank...

As someone who has organized a convention, I feel like I can add to this thread. Back in 2003, we were scheduled to use a track in OK (forgot the name), but either the owner or the track went bank...

As someone who has organized a convention, I feel like I can add to this thread. Back in 2003, we were scheduled to use a track in OK (forgot the name), but either the owner or the track went bank...

The B15 MC will be at an angle, and you could have air stuck in it. The Maxima MC fits perfect and will work if you use the top of the B15 on it. See here: How To: Hydraulic clutch converstion -...

The 2nd switch on the brake pedal is for the cruise control system.

To make the ChumpCar better, don't let Disney near it. :)

I have a Spearco boost gauge and Autometer pod.

If it's the water pump, let me know if you need help with it. Its not too bad of a job.

I shortened mine and the springs were a PITA to put on. I was wanting to see if the weaker coils were almost touching, with the setup off the car.

To add to the confusion, the '96 B14 lists 2 different part numbers for the rotor, and they are not the same. The '95 uses a different one, and I'm guessing the early '96 does too, while the later...

Technically, they are only 1 way adjustable, with 36 settings.

Steve talked to Darren at West End Alignment in CA when he built his jig. Since Steve lived on the east coast at the time, Darren was okay with sharing what he did since they would not be stealing...

You have one of the headers that killed the SR20 market. HotShot made a decent product, not saying it was the best but it was designed and tested for our cars, then OBX ad SSAC stole the design an...