All posts made by zero1dhd that members have liked.
1 |
quick engine harness question
yeah, turns out the motor was no good. I went on a longer drive than my work and back. It got a faint rod knock which got worse very rapidly. It finally sized the bearing and threw rod 1 through th...
yeah, turns out the motor was no good. I went on a longer drive than my work and back. It got a faint rod knock which got worse very rapidly. It finally sized the bearing and threw rod 1 through th...
yes, I got a new motor but am currently having issues with it running properly. I started another thread about that. Yes, I am very fortunate to live in a rust free zone for the cars' sake. Cost of...
I'm back in the game from the IE.
I'm back in the game from the IE.
I'm back in the game from the IE.
Best GA modification - Turbo. Unfortunately you pretty much have to build your own "kit" these days, but leave motor stock, slap turbo on it with some injectors, MAF, and ecu and beat the shit out ...
Best GA modification - Turbo. Unfortunately you pretty much have to build your own "kit" these days, but leave motor stock, slap turbo on it with some injectors, MAF, and ecu and beat the shit out ...
Best GA modification - Turbo. Unfortunately you pretty much have to build your own "kit" these days, but leave motor stock, slap turbo on it with some injectors, MAF, and ecu and beat the shit out ...
I used to use the " you have X unread threads/posts " link every time I come to the forum as I generally just troll on my breaks. I was bummed to see it go, but noticed the " new posts " clicky and...
upload pictures to an offsite picture hosting site such as photobucket, flikr, etc. Copy IMG code and paste here.
First off, what's up Tubtub long time no see. Second, the issue is what's posted in post #8 above. I personally went from t25 to t28 this past weekend and had to cut and re-weld both the inlet and ...
Not to thread jack or anything. Make these out of Romark. It's the material used for tactile lettering in signage. Comes in a world of colors and finishes, varying thickness starting at 1/16" and u...
I have the straight mild tubing in stock. I also have the mild plate in stock with a hookup on water-jet. I would have to buy the stainless plate and tube, that's the reason. I know the difference ...
GA16forum? It may be much slower than this forum, but a GA section in this forum would be just as slow. IJS
1 |