All posts made by metro_se-r that members have liked.
First question, is the latch broken? If it's not, then why bother. We reused the factory hinges, and the front of the hood itself sits on rubber stops in the bay out of the factory. The aftermar...
Go fast goodies... hmmm
Does an ebay sourced SSAC header and your compatible downpipe count as 'go fast'? I mean, the cat is gutted, there is no muffler, and it's a side exhaust, but the motor ...
Go fast goodies... hmmm
Does an ebay sourced SSAC header and your compatible downpipe count as 'go fast'? I mean, the cat is gutted, there is no muffler, and it's a side exhaust, but the motor ...
Side glass was gone as soon as we made it a race car. We're planning on replacing with plexi-glass, that and rear windshield, for more aero.
Here's a video of my run on second day. At this poi...
So we decided to change up the theme. New paint job and aero...
https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/13939330_1114905205229197_1239690586114041981_n.jpg?oh=2437fd5d14597c0ffd0567193fedc6...
So we decided to change up the theme. New paint job and aero...
https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/13939330_1114905205229197_1239690586114041981_n.jpg?oh=2437fd5d14597c0ffd0567193fedc6...
Yes, same protocol for Lemons and Chumpcar.
Being that we're going through alternators like hot knife through butter, I would be interested in knowing how this works out for you.
If I were you I'd focus on bringing the black one back to the shine of when you bought it.
B14 5MT driver's side axle seal part numbers
The issue is fixed, and I learned a valuable lesson today. And that's to use OEM parts. We ordered a Timkin throwout bearing, and reused the clips. Those were a bit stretched, and the tolerances...
It's a different valve cover, no point in keeping the old one since it was already off, we put the nicer one on that we had. I'd go see a doctor regarding your hearing though, the knock was clearl...
At full throttle this thing burns a gallon a minute.
It's a different valve cover, no point in keeping the old one since it was already off, we put the nicer one on that we had. I'd go see a doctor regarding your hearing though, the knock was clearl...
There's only one way to find out... (it won't last)
Unfortunately that is that motor.
Well, that old motor decided it had enough this past weekend. Enjoy the show.
https://www.youtube.com/watch?v=9CWoSSTW0BE
We are now looking for a replacement.
The Volvos do well, for whatever reason they're the only thing 'turbo' that's fairly reliable on the track. However BMWs are by far the most popular choices. Miatas are everywhere too, but most o...
If you're looking for OEM equivalent, we installed Exedy on our Lemons car. It held up great through 14 hours of abuse and no break-in period.
If you're looking for OEM equivalent, we installed Exedy on our Lemons car. It held up great through 14 hours of abuse and no break-in period.
You're not the only one...
http://i1261.photobucket.com/albums/ii600/MrMetros11/Saabaru/082cdf47.jpg
I'm the original owner.
Thank you guys, I take that as a compliment. But you must keep in mind, it looks clean because it was just spray painted. The reality of it is, this car is (was) a beater. The list of stuff we h...
You're not the only one...
http://i1261.photobucket.com/albums/ii600/MrMetros11/Saabaru/082cdf47.jpg
I'm the original owner.
You're not the only one...
http://i1261.photobucket.com/albums/ii600/MrMetros11/Saabaru/082cdf47.jpg
I'm the original owner.