All posts made by squirlz that members have liked.
Blowing off my cousin-in-law's wedding for this. I can't wait!!!
Blowing off my cousin-in-law's wedding for this. I can't wait!!!
Blowing off my cousin-in-law's wedding for this. I can't wait!!!
Blowing off my cousin-in-law's wedding for this. I can't wait!!!
My car is out and got the alignment done. New tires are sitting at home and will be installed next week. I will be ready for this one.
Get a tune-able ECU, all your idle problems will go away.
I have spent a lot of time getting my idle perfect. The rolling idle and idle recovery are quite different between the VE and DE so some a...
Put gas in and drive, not sure if I will have enough time. Maybe check tire pressure if i can get to it.
Your on the right track, the relay should be off when the car is off, if it is buzzing the ECU is still sending a signal, most likely 5v or less for the relay to buzz and not fully close. Sounds li...
Have you tried a new relay? You will need to check the signal at the relay to see if the ECU is sending out the ground to turn the relay on. If you are getting the ground from the ECU replace the r...
We call them oh jesus clips, because when you take them off the fly across the room and you go "oh jesus" and have to go find them. They make a tool to remove them, it looks like a flat spatula wit...
Have you tried a new relay? You will need to check the signal at the relay to see if the ECU is sending out the ground to turn the relay on. If you are getting the ground from the ECU replace the r...
Keep the dreams alive. Lots of good info out there any lots of help too.
I am running 370s at 4 bar and am at 70% duty at 220 whp, pump gas.
I already made the changes for him.
Put gas in and drive, not sure if I will have enough time. Maybe check tire pressure if i can get to it.
Shirts look awesome, i am not missing out this year.
Put gas in and drive, not sure if I will have enough time. Maybe check tire pressure if i can get to it.
I would rather get a RR DE, you can find them with known millage. I would guess that the VEs are no longer Low millage as advertised.
You take out the pump and pump from there, not through the filler.
Have you upgraded to the new tensioner? Is the upper chain guide still in the motor?
I have never heard that before and almost sounds like the chain is rubbing on something, like one of the guid...
I bought the Godspeed one off of a local guy and never had any problems. I have the Nismo T-stat and the temps never get above 180*F. Even on 90* days and i am beating the crap out of it the temps ...
We call them oh jesus clips, because when you take them off the fly across the room and you go "oh jesus" and have to go find them. They make a tool to remove them, it looks like a flat spatula wit...
We call them oh jesus clips, because when you take them off the fly across the room and you go "oh jesus" and have to go find them. They make a tool to remove them, it looks like a flat spatula wit...
The hard lines should be the same, i know on my B14 they were. The hard line mounts to the chassis tabs which do not move between models.
The master cylinder on the NX is 7/8", on the Sentra i a...