bhowle's Likes Received

205/50/15s bubble a good bit on my 6.5" wheels, I couldn't imagine what 225s would look like.

Road Course AND Karting?? Hmmmmm

I just pulled a 70A out of an 02 G20 at the junkyard. I'll see if I can get back up there and get you a pic of the VIN plate.

Use one of these: http://images.nationaltoolwarehouse.com/images/Product_Images/OTC/OTC-6530.jpg You can rent something similar from AutoZone/Advance/etc. I have replaced the ball joints in my OEM ...

The passenger (RH) side engine mount will cause the most vibration and noise in the cabin. Try replacing it with an OEM mount and see how the car feels.

Use one of these: http://images.nationaltoolwarehouse.com/images/Product_Images/OTC/OTC-6530.jpg You can rent something similar from AutoZone/Advance/etc. I have replaced the ball joints in my OEM ...

Looks rusty to me. I'd imagine there's a bit of a mess hiding behind the side skirts.

Use one of these: http://images.nationaltoolwarehouse.com/images/Product_Images/OTC/OTC-6530.jpg You can rent something similar from AutoZone/Advance/etc. I have replaced the ball joints in my OEM ...

Ran into more fitment issues. Diff is back at the machine shop and I am waiting to hear from them.

I am having fitment issues in the trans case due to the way the diff was machined. I'm taking it to my machinist tomorrow to hopefully have it fixed and complete a final test fit. I had the same is...

I am having fitment issues in the trans case due to the way the diff was machined. I'm taking it to my machinist tomorrow to hopefully have it fixed and complete a final test fit. I had the same is...

Definitely keep looking! Good deals are still out there. I picked this one up for super cheap last year: http://i.imgur.com/KjHyrdw.jpg
http://i.imgur.com/QSciUft.jpg
http://i.imgur.com/OzbHK03.j...

I am replacing both diff bearings and will provide pictures and an overview of shimming the diff.

Shimming the diff is fairly straightforward, however, that side bearing/race is quite expensive....

Received the prototype yesterday, here are a couple of pics!

http://i.imgur.com/NnYTVe0.jpg
http://i.imgur.com/TXYoaP8.jpg

I am waiting on the bearings to come in from the dealer and then I ...

You need passenger side (Right) bearing, speedo drive gear and retainer.

You need passenger side (Right) bearing, speedo drive gear and retainer.

Driver's side bearing, speedo gear and gear retainer were purchased from Amayama. Passenger side bearing was purchased from a local parts store.

Got a shipping confirmation yesterday on the bearings and drive gears. Should take them 10-14 days to come in from Japan.

I suggest anyone considering buying one of these diffs go ahead and orde...

Got a shipping confirmation yesterday on the bearings and drive gears. Should take them 10-14 days to come in from Japan.

I suggest anyone considering buying one of these diffs go ahead and orde...

Thanks! I ordered the bearing from the site a little while back (haven't gotten it yet, but I figured it will take some time coming from Japan), didn't think to check for the other parts. I just su...

Received the prototype yesterday, here are a couple of pics!

http://i.imgur.com/NnYTVe0.jpg
http://i.imgur.com/TXYoaP8.jpg

I am waiting on the bearings to come in from the dealer and then I ...

Thanks for the tip on that bearing! I'm gonna order it from them and see how it goes. The dealer wants $216 for it.

Unfortunately, the dealer also told me that the speedo drive gear and retainer...

The bearing needed is specific to the VLSD trans. Post 209 shows the part number on the actual bearing. I removed it from a 1993 SE-R transmission. Nissan's part number for this bearing is 31408-31...

It's simple to remove the axle and makes the PS pump replacement easy as hell. You can spend the 10 minutes it takes to pull the axle and save yourself a ton of aggravation and cursing, or you can ...

Here is the NSK part number directly off of the bearing I removed from a B13 transmission: http://i.imgur.com/cbMXlxr.jpg

I can not find a bearing in the NSK catalog that matches the dimensions of...