All posts made by 2_Liter_Turbo that members have liked.
Here's the flow comparison:
http://img.photobucket.com/albums/v689/93s13/Forum/SRCylHeadFlowTest_zpsd96eeb77.jpg
Some pictures I have of the head:
Close up of work done behind the valve seat
http...
If interested, I have flow numbers for a stock VE head compared to my +1mm valved and mildly ported highport head (it's a RWD head, but very similar if not the same ports). I also have pics of the ...
If interested, I have flow numbers for a stock VE head compared to my +1mm valved and mildly ported highport head (it's a RWD head, but very similar if not the same ports). I also have pics of the ...
If interested, I have flow numbers for a stock VE head compared to my +1mm valved and mildly ported highport head (it's a RWD head, but very similar if not the same ports). I also have pics of the ...
If interested, I have flow numbers for a stock VE head compared to my +1mm valved and mildly ported highport head (it's a RWD head, but very similar if not the same ports). I also have pics of the ...
I tried the exhaust method with little success. I ended up using a hybrid valve cover (S13 SR front section welded onto an S14 valve cover) plumbed into my intake directly with no oil catch can at ...
If you included the RWD guys... then maaaaaaybe, ha ha
If you included the RWD guys... then maaaaaaybe, ha ha
Racing the S13: 2013 Bible Creek Hillclimb
I hear you there. IMO, it should ONLY be a tail pipe test and maybe a brake, tire & seatbelt inspection as well. As long as the car is safe and burns clean, then who cares what's under the hood.
I had the same issue before, it was a bad battery (bad cell). Take your battery in and get it checked. Mine still had "12v", but because one cell was bad, it wasn't working. Put a new battery in an...
The Duralast lower control arm is a re-branded Dorman part that's made in China. Just a little info from someone who JUST replaced this on a friend's B13, lol.
I know I'm sort of the "odd-guy out" around here, but from what I've seen over the past couple years, I'd say BenFenner as well (if he wants it).
I'll start it off I guess, lol.
http://img.photobucket.com/albums/v689/93s13/My%20S13/White%20Coupe/04-28-13_92S13_10.jpg
http://img.photobucket.com/albums/v689/93s13/My%20S13/White%20Coupe/04-28...
From my experience, I will say that I would never buy ANYTHING from BC. Their (or whatever company that makes the product for them) quality control sucks and I've seen too many variances and failur...
How long is this good for? Waiting for tax returns, lol
Not sure why you'd want to run hydraulic cams on solid lifters, lol, the ramp profile is too aggressive and makes the valve close to fast/hard (what is causing the noise). If the shims don't fail, ...
Longblock means and engine from the valve cover to the oil pan. Shortblock means the bottom end with rotating assembly only. Those terms are universal for any engine. FWD SRs have a distributor (fo...
Yeah 1500 is actually what my dad told me to use, but I had some 2k laying around, ha ha. Just takes a bit longer. I'm not going crazy trying to get all the peel out of the clear, as I only have tw...
I just painted my VE valve cover with automotive grade lacquer rattle can (primer/color/clear) and am wet sanding it with 2000 grit then buff with a rubbing compound, some polish, then some wax. So...
I'm pretty sure that the check valve is just shut at all times to be honest. The hose past the check valve is bone dry. I'll be removing it this week, before going in for the tune. And just capping...
I tried it out. I had a moroso PCV check valve made for this exact application plumbed between the valve cover and the downpipe. It didn't work too well, so I went back to just the tube from the VC...
I have the same on my 425whp S13, lol. My favorite sounding exhaust for an SR. Sad to see it go when I swap everything over to my S14, lol.
Ahh, lol. It turned out to be that I was running the wrong cams. They were cams designed for the factory hydraulic lifters (which can be more aggressive due to the "give" in the lifters). I knew th...
Well, a few months ago I found a local guy selling a B15 SE-R Spec V Stillen Catback exhaust for really cheap. So I picked it up, hoping that it was a direct swap over (not knowing). I finally put ...