All posts made by Doug Fab that members have liked.
New batch of fuel rails will be coming in november. Please pm me or email me to place orders.
[email]Dougfab88@yahoo.com[/email]
Thank you
New batch of fuel rails will be coming in november. Please pm me or email me to place orders.
[email]Dougfab88@yahoo.com[/email]
Thank you
not a prob guys.
years ago ford gave us a conn book to keep in the shop to find conn for ford vehicles easily.
I remembered the book and im always looking for conn pigtails. so when I was do...
[url= URL=http://s1019.photobucket.com/user/sr20boosted/media/B14%20Build/DSCF0362_zps77ba51ac.jpg.html][img]http://i1019.photobucket.com/albums/af312/sr20boosted/B14%20Build/DSCF0362_zps77ba51ac.j...
Finally Finally Finally!
Time to give you all hope that this thread isn't over!
Machined flange block for intake to bolt to so I could machine. Kept everything nice and tru while milling.
...
[url= URL=http://s1019.photobucket.com/user/sr20boosted/media/B14%20Build/DSCF0362_zps77ba51ac.jpg.html][img]http://i1019.photobucket.com/albums/af312/sr20boosted/B14%20Build/DSCF0362_zps77ba51ac.j...
This manifold is basically bare bones version.
on the back side of intake is a throttle bracket and a vacuum block. but we did not fab a angle on the end or any cruise brackets.
I just finis...
This manifold is basically bare bones version.
on the back side of intake is a throttle bracket and a vacuum block. but we did not fab a angle on the end or any cruise brackets.
I just finis...
This manifold is basically bare bones version.
on the back side of intake is a throttle bracket and a vacuum block. but we did not fab a angle on the end or any cruise brackets.
I just finis...
the square cut seals that I send out with all my injectors are to be used in conjunction with the oem rubber cushions.
the square cut seal that is on bottom of inj is what actually does the seal...
I will get you guys some pics before the New Year!
I know this forum gets pic happy. haha
Doug Fab wont disappoint
should be getting these ready this weekend!!!
Jason sr20guy says his rail cleared excessive plenum. waiting on him to get us some pics.
here s a rail that I just finished for my car!
this is what your fuel system could look like!!!
[...
Finally Finally Finally!
Time to give you all hope that this thread isn't over!
Machined flange block for intake to bolt to so I could machine. Kept everything nice and tru while milling.
...
All tacked up! 3" all the way. oval to round.
Just gotta finish weld.
[url= URL=http://s1019.photobucket.com/user/sr20boosted/media/Fab/IMG-20140308-00125_zpsce522fec.jpg.html][img]http://i10...
All tacked up! 3" all the way. oval to round.
Just gotta finish weld.
[url= URL=http://s1019.photobucket.com/user/sr20boosted/media/Fab/IMG-20140308-00125_zpsce522fec.jpg.html][img]http://i10...
exactly the square oring will go on the inj then install factory bushing around ID o ring then install into intake.
heres how mine look when installed. Note this is a VE application but I would ...
theres plenty of options out there for FWD turbo setups.
I feel your budget may be a tad tight for t3.
best bet is to go with a gt2871 on a modified gtir mani.
you will be more then impres...
maybe someone will produce a PnP wiring harness if there is enough guys that are gonna do this swap.
I would think best option would be a EMS but that's just me.
not sure if there is a much eas...
All tacked up! 3" all the way. oval to round.
Just gotta finish weld.
[url= URL=http://s1019.photobucket.com/user/sr20boosted/media/Fab/IMG-20140308-00125_zpsce522fec.jpg.html][img]http://i10...