All posts made by SR20? that members have liked.
1 |
Aaron saved the day. Thanks
Oh em gee, I may bring out the LS1 240 for this.
I'd just like to say,
S13 shell ~$1000
Totaled 03-06 gto ~$3500
Sikky mount kit, sway bar, and master cylinder ~$3500
Miscellaneous stuff ~$1000
---------------------------------------...
I got my rotors from rockauto.com. They were the Centric wholesaler closeout special and were $8 per rotor. I found the calipers are actually cheaper from a local parts store vs rockauto, though.
...
Definitely going to go E85 soon, seems to be pretty straightforward to switch. Those walbro 450 pumps are fairly cheap, too.
Just curious, what was the difference in timing maps between the 93 octane and e85? JKTUNING
I'd just like to say,
S13 shell ~$1000
Totaled 03-06 gto ~$3500
Sikky mount kit, sway bar, and master cylinder ~$3500
Miscellaneous stuff ~$1000
---------------------------------------...
http://img130.exs.cx/img130/909/srm184lg.jpg
http://img14.exs.cx/img14/2973/14953srm1med4di.jpg
http://img130.exs.cx/img130/2444/srm226um.jpg
Here is a thread on it if you want more pics. Looks ...
RTV is a high-heat silicone used in automotive to seal certain liquids and prevent them from leaking. They sell it at Autozone.
Teflon tape works well for sealing threads.
You need to read mo...
I think you're right, Vadim. I'm just guessing, trial and error kind of thing.
I did finally get it to start with lynch's 2nd bin. Latency at 1.5ms and k value at 40k. Started to give it more fuel...
http://www.sr20-forum.com/tuning/40511-beginners-guide-chipped-ecu-tuning.html#post522668
This is very helpful.
Mark the chain and the cam gears on both cams so you know where they go together. Then just take the chain off. Make sure you compress your tensioner before you install it. Then you can put your ca...
1 |