All posts made by Forced Compression that members have liked.
My last set up on my 200sx is a holset hx40 with a BEP .70 t3 housing with a custom 67mm billet compressor wheel, 10 blade turbine wheel. I have been using holsets since I upgraded to large frame t...
My last set up on my 200sx is a holset hx40 with a BEP .70 t3 housing with a custom 67mm billet compressor wheel, 10 blade turbine wheel. I have been using holsets since I upgraded to large frame t...
i ran this turbo for a couple years on my infiniti g20. The turbo hauls ass, hits way harder than a t28 and pulls all the way to the redline like a freight train. i ran a avenir manifold and i had ...
i ran this turbo for a couple years on my infiniti g20. The turbo hauls ass, hits way harder than a t28 and pulls all the way to the redline like a freight train. i ran a avenir manifold and i had ...
https://www.youtube.com/watch?v=YSoO4d8fQXU
i believe this is the same car
yard man been "burning fire" on a lot of things for years now, so our hands use to the heat yuh see it
yard man been "burning fire" on a lot of things for years now, so our hands use to the heat yuh see it
Put me on the list
the newer engine has more finicky sensors and a lower flowing intake manifold, it also uses different injectors ect. so its easier to bolt on a low port intake manifold which makes the swap plug an...
https://www.youtube.com/watch?v=YSoO4d8fQXU
i believe this is the same car
i settled for the tomei pon cams, i did contact cat cams in the uk and they were willing to work with me and ship the product to me, they were also willing to make anything i wanted
i settled for the tomei pon cams, i did contact cat cams in the uk and they were willing to work with me and ship the product to me, they were also willing to make anything i wanted
looking at the grill and the trunk i am not sure that is jdm, but more of a convert. but i could be wrong. that 4 fog bumper never came with those headlights or grill, nor did the supersaloon kit c...
what is the deal with this, my car has been sitting for over a year because i shredded 4th gear, i have 2 dead p11 trannies i would love to repair i am tired of destroying transmissions and i am no...
what is the deal with this, my car has been sitting for over a year because i shredded 4th gear, i have 2 dead p11 trannies i would love to repair i am tired of destroying transmissions and i am no...
anything from a g20 will make a sentra better :p
how is oil drainage with this manifold
my car is bare bones, just head lights tail lights indicators and horn and fan. i start from the fuse box and rip out the wires to the relays i dont need as well as the fuses i dont need. i also cu...
anything from a g20 will make a sentra better :p
anything from a g20 will make a sentra better :p
ive always had issues with the rubber in the manifold, ive been using jdm rr/ve manifolds and i use silicone and tension on the rail to seal, but this is my plan for a more profession approach
im ...
fuelab, because they can handle high pressures and fairly easy on the pockets , but you want something oemish im guessing
pros: will cause an increase in hp
cons: will cause an increase in tire wear
pros: will cause an increase in hp
cons: will cause an increase in tire wear
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top
