Coheed's Likes Received

I put a deposit on a dark gray metallic BRZ limited. Got one option, and that is the auto dimming mirror with compass and home link for my garage door.

I'll be waiting for a bit to get it though....

K20's pull premium one-week before race wars!

Nah, just doesn't have the same ring to it. lol

K20's pull premium one-week before race wars!

Nah, just doesn't have the same ring to it. lol

K20's pull premium one-week before race wars!

Nah, just doesn't have the same ring to it. lol

K20's pull premium one-week before race wars!

Nah, just doesn't have the same ring to it. lol

I thought I was going to be able to take it easy for 500 miles... ya right. Got the car on the road today. Checked for oil pressure, leaks, and made sure it didn't overheat. About 5 minutes later.....

Ok guys, I must be the luckiest-unlucky mother f*r out there. I pulled the head off with the engine still in the car. It went pretty smooth actually. Only took a couple hours of me hunched over. Bu...

The N1 were tested on low first. we then went to high boost and did a couple pulls. When we tried to pull up the first N1 graph, it said "runtime error". Just going from what JC told me, the power ...

N1 vs 20V blog, ate TB screw, fixed... i think.

I thought I was going to be able to take it easy for 500 miles... ya right. Got the car on the road today. Checked for oil pressure, leaks, and made sure it didn't overheat. About 5 minutes later.....

Ok guys, I must be the luckiest-unlucky mother f*r out there. I pulled the head off with the engine still in the car. It went pretty smooth actually. Only took a couple hours of me hunched over. Bu...

So... the SR needs 2 things to run... MAF, and distributor. Glad you got it figured out. These cars are so simple.

What about the B14 with a B15 rear beam with a little less toe in? I can get the rear to swing around easily. Most of my understeer at this point is from power-on. But when you lift you get a bit o...

Greg, once again, is the MAN. Had a gasket in stock. He says it will be shipped tomorrow. Should be here by the end of the week. Next Sunday I should have time to put it together. Might as well put...

I can't believe the valve seat and the valve are completely unscathed! I'm feeling really good right now. Just put the cams back in, pulled the valves open. Inspected the seating of the valve. Ever...

I am going to keep her for now. Fix some things, and come back stronger than ever. Each time I dig into this car, it gets a little bit better. Wish me luck on this new endeavor fellas.

Now let's see if that 6 speed can hold up!

Someone put a QG18 stack in there with the B15 FD? Because the pinion won't line up and will whir like crazy.

The RR and disco was a match made in heaven :)

http://www.youtube.com/watch?v=Q-xXC9by824&list=UUmlkwIRhu7ihdKT-n8y8XVA&index=3&feature=plcp

http://www.youtube.com/watch?v=-yYvVfmWulo&list=UUmlkwIRhu7ihdKT-n8y8XVA&index=4&feature=plcp

http://...

Yeah, it lets 3rd go practically after the cams switch. It comes on hard, and the tires let go. You can't really hear it, but the tires were wailing. Can't hear it over the open wastegates though. ...

http://www.youtube.com/watch?v=Q-xXC9by824&list=UUmlkwIRhu7ihdKT-n8y8XVA&index=3&feature=plcp

http://www.youtube.com/watch?v=-yYvVfmWulo&list=UUmlkwIRhu7ihdKT-n8y8XVA&index=4&feature=plcp

http://...

N1 vs 20V blog, ate TB screw, fixed... i think.

N1 vs 20V blog, ate TB screw, fixed... i think.

N1 vs 20V blog, ate TB screw, fixed... i think.