All posts made by Coheed that members have liked.
Get name brand. The silicon intake fans pull less than 10 amps. The don't flow anywhere close to stock. Get some spal fans. They actually work.
I didn't switch the exhaust cam on the dyno, but I did try switching it. The cam lobe seemed really unrefined and actually lost power. The intake cam switch only is what provided the most power. BT...
Imho the GTx2867r will be the better choice and make awesome power for street or track. The GT30r, well... most know my opinion on that turbo. The 76r is a mismatch. I know others will say otherwis...
15psi isn't inefficient for this setup or for the 6262. The low torque is due to the low boost, which is related to the density of the air. This turbo is perfectly happy at 15psi. Precision turbos ...
87mm is the highest you generally find turbo piston sizes in. If you do want to go 88mm I would only advise against it because the sleeves are only about 4mm thick to start with. You have very litt...
If you guys are talking about this clip seen here
http://i295.photobucket.com/albums/mm158/CoheedJV/transmission/DSCN2570.jpg
You have to bolt the trans all together and when the cases are bolted ...
They aren't required. Nissan put those there to alter airflow characteristics across the pintle, but I've run plenty of cars without them and they've run just fine. I wouldn't be too concerned.
If...
So, it looks like the 20V cams dominated the N1 on low boost with this setup, but the N1 performed better on higher boost levels. Look how hard the N1 cams come on boost! Insanity.
I've tested all the cams in the super sentra. The 20V made the most power, especially at high rpm with the 6262 turbo. The N1 were my favorite cams to run because of how the engine felt/sounded. Th...
Posts like this piss me off. There's no reason people should live such a short life! It pains me every time I hear this. RIP buddy!
I did that once to my mom. No video. Only bite marks in my passenger seat as a constant reminder.
Yes, just keep in mind that the 4.176 has to have it's mating pinion gear as well (aka main shaft).
IT WORKS! Put QG18 gears in your P11 TRANS! 56k take a nap.
BRZ track experience and impressions
BRZ track experience and impressions
You guys may need to improvise in this situation by spacing the mount however you need to by sandwiching washers in place to make sure the alignment is good. Until this gets an official fix from ma...
I've run over 25psi on the blow-thru z32 maf without failure. Not that I'd recommend it, but I did run over 15psi for years with the GT30r without any issues.
These are race bearings, and have a little more oil clearance built in. It may be necessary to run thicker oil to compensate. This isn't a bad thing, as these engines output are pushed way beyond f...
lol ben you crack me up. So you tried to remove it anyway huh? lmao.
Always a great learning experience!
I guess you are going to have to use motorcycle plugs.
Absolutely. After all, the metal is all the same right?
HDEO oils have much more anti-wear additives to fight aging, since they are rated for industrial use. For your normal oils, they are held ...
This is getting somewhere! Because without anyone else having a similar issue, this would make hunting down the cause that much more difficult. We need to narrow down whether or not the dealer's mo...
My experience with the phantom grip is that they live a short life. I haven't had one last more than a year or two in other vehicles.
The nismo LSD is a nice unit, but less suited for a street ca...
Looks like a great way to provide awesome low-end power. But I find myself skeptical that it will provide the 300whp I am looking for. Sigh.
But this kit is amazing, though pretty pricey.
Com...
Over $6k for their supercharger kit, includes no tuning, looks like crap, and makes less power than anything out on the market. Even though the price is exuberantly high.
http://www.youtube.com/wa...