All posts made by tswii that members have liked.
1 |
For those who have working cruise control (B13)
So there was known rear mount issues too? I had so many problems with this kit. I made my own driver's side and modified the rear mount to correct it. I discovered that it was broke when I removed ...
So there was known rear mount issues too? I had so many problems with this kit. I made my own driver's side and modified the rear mount to correct it. I discovered that it was broke when I removed ...
Any sr crank, except the gtir, will be a direct swap into any other sr block. The only thing you need to do is check the bearing surfaces of the crank to make sure they are within oem tolerances. I...
It's called customer service. Greg has great customer service. I've bought 2$ add $200 dollar parts from him. Helping people out with the small stuff goes a long way. It earns you repeat sales by e...
Another off the shelf rear brake upgrade.
Just look on rock auto under NX. Stock rotors are; Front-257mm vented, rear-234mm solid. It's stupid simple to choose what you need. The ones that say abs and 258mm rear are for the maxima\g20 rear...
I put the entire kit in a long time ago. The ride quality was better. I only changed what was bad, like the sway bar end links. If it's not broke don't fix it. You'll just need to check everything ...
In the very last pic you see the Mazworx driver side mount on the left, and a properly positioned mount that I fabbed to replace it on the right in red. I had to move the nut on the rear mount as w...
I've used a water pressure gauge from home depot a while back. It worked great until the vibrations from the engine finally screwed up the needle after about 6 months, so I just bought a summit liq...
I finished my 6 speed swap at the end of december on my NX.
Well It has been quite a long wait to see this issue resolved. I bought some metal friday to start working on building my own mounts. It's been raining like crazy in NE FL this weekend, so no progr...
Yeah. Before the info was posted about only the 2.5L hubs fitting the spec v axles I'd already bought some knuckles off of a 1.8L. Also, I'd already bought spec v wheels, and a set of brembos too. ...
I forgot to add that the driftworks S15 flywheel only weighs 15.6 lbs.
I just installed an AEM universal FPR, and it is a rising rate regulator. I made a bracket for it, and bolted it to the firewall. You will need that nismo fuel rail adapter, and some hose barbs for...
1 |