All posts made by Vadim that members have liked.
I opened it up because I didn't feel like it was fair for me to post and others not to post (I'm just getting back from a weekend long camping trip so only now seeing all the messages).
This doesn...
First of all, don't blame the OP, he simply started the thread that all moderators and admins can modify. I'm the one that added you to the list and for what I honestly believe is a good reason, e...
First of all, don't blame the OP, he simply started the thread that all moderators and admins can modify. I'm the one that added you to the list and for what I honestly believe is a good reason, e...
First of all, don't blame the OP, he simply started the thread that all moderators and admins can modify. I'm the one that added you to the list and for what I honestly believe is a good reason, e...
Thank you very much, saved me $7 on some shocks for my parents :)
Thing is, unless you start restoring the geometry your doing a lot of bad when going that low. Front you can correct with taller ball joints (though we have to find which ones will work still), re...
How to Install Lowport Intake Manifold on RR
I'm planning on doing the camber curves of stock UCA's with factory and new mount points while replacing some shock stuff. I'm trying to see how much the shorter arms affect the curve, because I w...
Update! I used the stock shock without a spring to do a proper camber curve. I was able to do -2 to +2 wheel travel measurements in ~10mm increments.
The static height is about 1" lower then s...
P11: Lowering Rear UCA Mounting Point
I'm very liberal with tape myself, at best it provides a more solidness to the box, and it's noticeable if someone opened it.
P11: Lowering Rear UCA Mounting Point
P11: Lowering Rear UCA Mounting Point
I use sil-glyde religiously now. I used to use just what ever grease I had on hand, then one day 200 some miles form home I feel my Legacy started to brake on the highway and awful brake smell. S...
Awesome cars man! Let me know if you want to move this thread to Members Rides :).
Banned! BenFenner, what ever happened to one touch ban and clean :)
Banned! BenFenner, what ever happened to one touch ban and clean :)
I have no issues with that, keep it objective and not personal and your good (which you were, but I wanted to make sure we didn't get another FS thread fiasco).
Awesome article and talks about overlap for turbos.
That article applies to all cars with cams, so it's applicable to S4's too.
Storm88000 and 91sentragti-r I HIGHLY suggest you guys ignore each other before this gets out of hand again.
To add my two cents, which are worth exactly that, about cam gears. If your looking f...
Awesome article and talks about overlap for turbos.
That article applies to all cars with cams, so it's applicable to S4's too.
Awesome article and talks about overlap for turbos.
That article applies to all cars with cams, so it's applicable to S4's too.
Awesome article and talks about overlap for turbos.
That article applies to all cars with cams, so it's applicable to S4's too.
Storm88000 and 91sentragti-r I HIGHLY suggest you guys ignore each other before this gets out of hand again.
To add my two cents, which are worth exactly that, about cam gears. If your looking f...
Your BOV is staying open because the idle vacuum is opening the piston, this causes metered air to leak out, essentially being a vacuum boost leak. If you can't or don't want to recirculate the bes...