All posts made by Mattick22 that members have liked.
My wife is the anime fiend so I will be referring to her for contributions on that subject. We definitely plan on going to the massive Cosplay festival in Harijuku next year.
Right now the hard...
I would look at the Z33 trans as that is what is also used in the Frontiers and Xterras. The Z32 I cannot speak on but I would think since the Z33 was used in SUV/Truck applications the shifter wou...
I would look at the Z33 trans as that is what is also used in the Frontiers and Xterras. The Z32 I cannot speak on but I would think since the Z33 was used in SUV/Truck applications the shifter wou...
As soon as I get this installed Ill try to upload a video with some decent sound. I wanted as quiet of an exhaust as possible, so Doug Fab built this for me. Here are the specs
- VRS 3" Piping Ki...
As soon as I get this installed Ill try to upload a video with some decent sound. I wanted as quiet of an exhaust as possible, so Doug Fab built this for me. Here are the specs
- VRS 3" Piping Ki...
As soon as I get this installed Ill try to upload a video with some decent sound. I wanted as quiet of an exhaust as possible, so Doug Fab built this for me. Here are the specs
- VRS 3" Piping Ki...
Here is the setup that Doug Fab fabricated for Maria. He used a regular "tee" setup because a "Y" would not have fit with the setup.
https://farm9.staticflickr.com/8735/16694427108_f1473e8e3c_o....
Here is the setup that Doug Fab fabricated for Maria. He used a regular "tee" setup because a "Y" would not have fit with the setup.
https://farm9.staticflickr.com/8735/16694427108_f1473e8e3c_o....
Here is the setup that Doug Fab fabricated for Maria. He used a regular "tee" setup because a "Y" would not have fit with the setup.
https://farm9.staticflickr.com/8735/16694427108_f1473e8e3c_o....
Here is the setup that Doug Fab fabricated for Maria. He used a regular "tee" setup because a "Y" would not have fit with the setup.
https://farm9.staticflickr.com/8735/16694427108_f1473e8e3c_o....
Fuel Filter & Pressure Regulator Bracket
OK so PayPal reopened the case on the 11th and decide today in my favor and I was fully refunded. All is well now. Be smart people, if it smells funny don't eat it!
canx2k Shawn B
Piping Hot Box On Its Way!!!
https://farm8.staticflickr.com/7531/16192506971_49aee09897_k.jpgPipe the fu/< down by Mattick22, on Flickr
Just got the pic. You should be able to find that at a junk yard if you really wanted to. I would however strip back the three wires and crimp on some ring terminals and the get a nice battery term...
To get it home I would use some vise grips, a load of duct tape and a preyer maybe. Or Safety wire the hell out of it.
Shawn B The FMIC piping is now sorted. Ill PM you for your address. Good Luck with the rest!!!
Its probably the few that are on the outside of the head that connect it to parts of the block and front cover/oil pump housing.
canx2k Andrew, Can you use any FMIC piping from a B14/GTiR application?
Also if you see anything in my classifieds let me know and ill ship it out to you.
Or if you need a tranny saver core let m...
The only thing I have that may work is a good tranny bracket core. Let me know if its wanted and Ill ship it.
EDIT:
I may have some extra FMIC Piping too although its for a GTiR/B14 setup.
Dude you rock thanks! Now to find out the necessity of that Steering Angle Sensor...
HOW TO: B13/B14 Electro-Hydraulic Power Steering
Ben I do not receive any either and I have hotmail. Thanks!