All posts made by zeneffect that members have liked.
20v valve cover hose to block replacement
20v valve cover hose to block replacement
20v valve cover hose to block replacement
20v valve cover hose to block replacement
20v valve cover hose to block replacement
battery box arrived after months of searching for one that will fit.
https://s12.postimg.org/5mnmjt5pp/14..._258811658.jpg
installing this weekend. battery + box = 3.1lbs
battery box arrived after months of searching for one that will fit.
https://s12.postimg.org/5mnmjt5pp/14..._258811658.jpg
installing this weekend. battery + box = 3.1lbs
battery box arrived after months of searching for one that will fit.
https://s12.postimg.org/5mnmjt5pp/14..._258811658.jpg
installing this weekend. battery + box = 3.1lbs
battery box arrived after months of searching for one that will fit.
https://s12.postimg.org/5mnmjt5pp/14..._258811658.jpg
installing this weekend. battery + box = 3.1lbs
battery box arrived after months of searching for one that will fit.
https://s12.postimg.org/5mnmjt5pp/14..._258811658.jpg
installing this weekend. battery + box = 3.1lbs
Sounds like a douche bag and that he should fix everything this weekend out of pocket. There are tons of auto dismantlers n socal with the parts you need.
big injectors NA is not a problem. I'm running ID1000 on 91 gas with zero idle or startup issues whatsoever.
http://freeappsarcade.com/app-images/spaghetti-mountain-race-screenshot-0.jpg
yes i am fully aware that i have contributed absolutely nothing to this thread.
http://media.giphy.com/media/Se0nSGYkPOM0w/giphy.gif
Get a bigger more efficient turbo. It will reduce both intake charge and exhaust temps.
Those are the magic words. Thanks!
Indeed. Dss had issues getting the axle in. This is showing an actual quality part. Me wants, no faceballs.
Pm me KLUTCH
Indeed. Dss had issues getting the axle in. This is showing an actual quality part. Me wants, no faceballs.
Pm me KLUTCH
https://s32.postimg.org/svy3vu6tx/20160723_122517.jpg
North East coast guys be jelly. They know this bolt.
"Weld the bung at least 24 inches downstream of the exhaust port
outlet (after the collector), or 24 inches after the turbocharger if so
equipped. The bung should be welded before the X or H pipe...
https://s32.postimg.org/z05pz7fj9/20160626_171421.jpg
Installed:
Fuel lab afpr on the firewall
Id1000 injectors
S90 72mm throttle body
Deleted iacv
Reworked intake tube
O2 induction intake manifo...
https://s32.postimg.org/svy3vu6tx/20160723_122517.jpg
North East coast guys be jelly. They know this bolt.
https://s32.postimg.org/svy3vu6tx/20160723_122517.jpg
North East coast guys be jelly. They know this bolt.
Sprayed 3 coats of clear poly on a set of turbofx rear lca, installed them, installed progress rear sway, replaced rear brake pads and rotors.
That is all.