JKTUNING's Likes Received

They offer one of those as well.. it is called the TunerView II.

I had one in my old 1998 Civic, it displays the same things that the RD1 can.

I am not sure if they will end up being supporte...

You can adjust the knock sensitivity and levels through out the RPM range.

The knock sensor thresholds are completely definable per cylinder and can be used through the entire RPM range if you w...

You can adjust the knock sensitivity and levels through out the RPM range.

The knock sensor thresholds are completely definable per cylinder and can be used through the entire RPM range if you w...

To make the cut more aggressive you would enable ignition cut rev limit and set your anti lag start RPM 150-250 RPM under your launch control RPM.

You also will need to set the max ignition retard...

I have actually been working on this a bit and have also been looking at the knock output.

To make the cut more aggressive you would enable ignition cut rev limit and set your anti lag start RPM 150-250 RPM under your launch control RPM.

You also will need to set the max ignition retard...

To make the cut more aggressive you would enable ignition cut rev limit and set your anti lag start RPM 150-250 RPM under your launch control RPM.

You also will need to set the max ignition retard...

I will see what I can do about adding an option to "OR" them instead.

I will see what I can do about adding an option to "OR" them instead.

I would venture to guess that this is false knock caused by something on your engine.

For example, a loose exhaust bolt/hanger or anything like that can cause these types of symptoms.

I would...

As long as it isn't June 20th or anywhere within a few days of that date, I should be able to come.

The hotel is only about 1.5 hours from the shop and the track is only about an hour or so from...

That wouldn't be a bad idea and something that we could certainly coordinate around this time since it will be so close.

We'll just have to see how it works out!

That wouldn't be a bad idea and something that we could certainly coordinate around this time since it will be so close.

We'll just have to see how it works out!

As long as it isn't June 20th or anywhere within a few days of that date, I should be able to come.

The hotel is only about 1.5 hours from the shop and the track is only about an hour or so from...

That wouldn't be a bad idea and something that we could certainly coordinate around this time since it will be so close.

We'll just have to see how it works out!

Damn, that is literally the only weekend I can't do .. I get married on the 20th! :mad:

That wouldn't be a bad idea and something that we could certainly coordinate around this time since it will be so close.

We'll just have to see how it works out!

As long as it isn't June 20th or anywhere within a few days of that date, I should be able to come.

The hotel is only about 1.5 hours from the shop and the track is only about an hour or so from...

There are a few things you definitely need to watch out for when using E85 or any alcohol based fuel in these older cars/tanks.

It tends to break down any of the built up sediment that is in the...

I actually bet you inadvertently set your "SET LAUNCH" with the throttle before startup and set your launch control by accident that low.

This is actually a common thing I get messages about .. ...

What Dave said is it will be up to the program side to determine the map sensor correlation!

Which means that I can have a drop down menu in NismoTronic for the end user to select the current map ...

There are a few things you definitely need to watch out for when using E85 or any alcohol based fuel in these older cars/tanks.

It tends to break down any of the built up sediment that is in the...

Sorry fellas, I didn't mean slow down the actual upload the the ECU .. I simply meant to slow down the timer for the sound :p

Sorry fellas, I didn't mean slow down the actual upload the the ECU .. I simply meant to slow down the timer for the sound :p

Black to ECU ground.
Blue to where ever you want to wire it into (ADC or MAF input wire)
Red to 5v source (either breakout box OR TPS 5v) - I suggest wiring it all through the ADC breakout box (w...