JKTUNING's Likes Received

How is this?

http://www.j-k-tuning.com/NismoTronic/GraphingNEW.jpg

I highly suggest saving your tune (TCD) and then reopening it when you start nismotronic, instead of importing it from the emulator!

There is a voltage offset value under all of the adc channels...

Should be back up in 48 hours... that time can't come soon enough!!

Should be back up in 48 hours... that time can't come soon enough!!

Should be back up in 48 hours... that time can't come soon enough!!

Yes, you can use a physical switch that is wired to one of the inputs on the ECU or you can use set parameters (RPM, Speed, Gear, .. )

Version 2.20.00

Voltage Offset for the ADC inputs so the end user can easily scale their inputs to match the gauge.

Fixed Gauge Window bug that would save the window off the screen.

Version 2.20.00

Voltage Offset for the ADC inputs so the end user can easily scale their inputs to match the gauge.

Fixed Gauge Window bug that would save the window off the screen.

TunerCode logging is by far the best OEM logging structure available (it isn't stock consult format).

TunerCode also adds extra features like set launch (launch control), spark (ignition cut) re...

TunerCode logging is by far the best OEM logging structure available (it isn't stock consult format).

TunerCode also adds extra features like set launch (launch control), spark (ignition cut) re...

You would need two ostriches .. your ECU uses 2 x 32kb chips so you would need to emulate both of them. So, that ends up being $350 JUST for the dual ostrich setup.

You would then need a chip pr...

You could still use your current ECU with the NismoTronic package. The only thing you will need to do is solder 3 wires to the ECU pins

Found here.

NismoTronic Help - Installation

The boar...

You could still use your current ECU with the NismoTronic package. The only thing you will need to do is solder 3 wires to the ECU pins

Found here.

NismoTronic Help - Installation

The boar...

You would need two ostriches .. your ECU uses 2 x 32kb chips so you would need to emulate both of them. So, that ends up being $350 JUST for the dual ostrich setup.

You would then need a chip pr...

You would need two ostriches .. your ECU uses 2 x 32kb chips so you would need to emulate both of them. So, that ends up being $350 JUST for the dual ostrich setup.

You would then need a chip pr...

Thanks man. If you guys have any questions about it, just let me know.

We are working on a new TunerCode firmware, here are some of the main features it will include

speed density support (map se...

OK, there is a lot of stuff in here that is definitely confusing.

Let's simplify this a bit.

The "IDLE TIMING" table is ONLY USED when the throttled is closed and the car is at an IDLE .. this ha...

Shipped it yesterday :)

The next batch will have a TunerCode and Moates logo on it. Probably around the sleeve or on the back.

College Beater - Built B16 - 360hp @ 18psi
http://www.j-k-tuning.com/images/Ek_hatch/boostedek02gp9.jpg

Out of College Beater - Sleeved B20 VTEC T3/T67 - 625 @ 25psi
http://www.j-k-tuning.com/imag...